![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: deansultrabuch
One set high current connector Up to 50 - 70A possible DEANS compatible.
scope of delivery
1 female connector..
1.90€
Ex Tax:1.56€
Model: adaptdeans
Charging cable to connect the charging device (Ultramat 14 or other) and the Lipo...
9.90€
Ex Tax:8.11€
Model: mcdc1
Nikon MC-DC2 Connector for BlipSwitch Duo
This Nikon MC-DC1 type connector can be used with our BlipSwitch Duo RC interface and is suitable for use with Nikon digital cameras such as the D70, D70s D80.000..
13.90€
Ex Tax:11.39€
Model: ledflexbl
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.90€
Ex Tax:4.02€
Model: cs8cmp
Description
CINESTAR 8 CAMERA MOUNT PLATE:
1 - C8 Camera Mount Plate
5 - Press Nuts
7 - BH M3x6 Screws..
48.90€
Ex Tax:40.08€
Model: cs8gnm
Description
CINESTAR GPS/NAVI MOUNT:
2 - GPS/NAVI Mount
4 - Press Nuts
4 - Clamps
4 - BH M3x35 Screws..
55.90€
Ex Tax:45.82€
Model: lp13065e
APC Thin electric prop left + right...
12.90€
Ex Tax:10.57€
Model: ribboncs
Simple ribbon cable extended version for Cinestar 6 and 8.
Used to connect your naviCTRL with your flight controller (ME).
Lenght 20cm
Â
Delivery:
2x5 ribon cable
2x3 ribon cable..
9.90€
Ex Tax:8.11€
Model: cs8sam
Description
CINESTAR SMALL ACCESSORY MOUNT:
2 - Small Carbon Accessory Mount..
15.90€
Ex Tax:13.03€
Model: csmc
Description
CINESTAR EXTENDED 150MM MOLEX CABLE:
5 - Molex Cable (individual cables)
2 - Molex Connector Housing Unit..
15.90€
Ex Tax:13.03€
Model: cs8mm
Description
CINESTAR MOTOR MOUNT:
1 - Motor Mount
4 - Press Nuts
4 - Clamps
4 - SH M3x35 Screws..
53.90€
Ex Tax:44.18€