![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: blcooleralu
Light weight aluminum heatsink anodized for all Mikrokopter brushless controllers. Works with old and new 2.0 versions.You will need Arctic Alumina™ Thermal Adhesive to mount these coolers properly.Recommended for all heavy lift applications.Technical Specs:• Material: black anodized aluminum•..
3.90€
Ex Tax:3.20€
Model: lp11047sfp
APC Propeller (left+right)
Delivery
2 piece (left+right)..
9.90€
Ex Tax:8.11€
Model: navictrl20
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and integrated compass. In together with a MKGPS the navigational capabilities of the Mikrokopter are expanded. (e.g. waypoint navigation, position hold ,...) The board is already SMD preassembled, there are only a few compone..
60.90€
Ex Tax:49.92€
Model: mkgps21
This is an MKGPS receiver with u-blox LEA6S GPS module and a passive antenna. Alternatively, the module can also be operated with an active GPS antenna. In connection with a NaviCtrl V2.x the MikroKopter can self-navigate Preassembled; there are only a few through hole components for self-assembli..
80.90€
Ex Tax:66.31€
Model: ircable
Cable with Infrared LEDCable with Infrared LEDÂ if you intend to use infrared control method of the camera (default length 20cm/7.9" - 5g)...
9.90€
Ex Tax:8.11€
Model: 55bullet
5,5 mm bullet conector
Very powerfull, can handle 100A.
Delivery:
2x man, 2x woman...
3.90€
Ex Tax:3.20€
Model: f550zen
Mounting bracket for Zenmuse H3-3D to F550..
18.90€
Ex Tax:15.49€
Model: f450zen
Mounting bracket for Zenmuse H3-3D to F450..
9.90€
Ex Tax:8.11€
Model: ec5para
EC5 Parallel Battery Harness 10AWG..
13.90€
Ex Tax:11.39€
Model: as150
The AS150 connector system is designed with 7mm Ø for a load capacity of 150A permanently and 200A temporarily and thus covers a wide range of applications.The plug on the ESC side is equipped with an integrated anti-flash and prevents sparking when the flight battery is connected.They can be used f..
8.90€
Ex Tax:7.30€
Model: vortexgopro
Vortex GoPro Recliner Kit
An updated anti-jello plate for the Vortex, which reclines the GoPro by 30 degrees, for optimal camera angle when flying at speed.
Includes:
1x Baseplate (Carbon Fiber)
1x Back Plate (Carbon Fiber)
2x 30 degree Side Plate (Carbon Fiber)
4x M3 Aluminium Nut
4x M3 Aluminium..
32.90€
Ex Tax:26.97€
Brand: DJI
Model: s900topboard
This is a replacement DJI S900 Center Frame Top Board. These plates are made from carbon fiber. Package also includes mounting hardware...
99.90€
Ex Tax:81.89€