![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: gpsshield11
This cover made out of PCB-material is attached directly to the MKGPS board. The side panels are easily connected using solder. This is also the ground plane for the GPS antenna. This increases the GPS reception. The signal to noise ratio for the rest of the electronics in MikroKopter is increased. ..
15.90€
Ex Tax:13.03€
Model: abstandm3x15
Spacers (Bolts)
Technical Data
Size: M3 x 15mm
color: black
delivery
12 pieces..
3.90€
Ex Tax:3.20€
Model: abstandm3x10
Spacers (Bolts)
Technical Data
Size: M3 x 10mm
color: black
delivery
12 pieces..
3.90€
Ex Tax:3.20€
Model: epp11345cf
This version uses chopped glas fiber. This makes the propeller stiffer, but also more brittle.EPP1345 propeller pairRight-and left-rotating propellerWe have also specially manufactured propeller mounts in the shop.
Technical Data
Diameter: 13" (33cm)
Slope: 4.5 "(11.43 cm)
Bore: 5mm
Delivery
1 Pa..
6.90€
Ex Tax:5.66€
Model: epp0845cf
This version uses chopped glas fiber. This makes the propeller stiffer, but also more brittle.EPP0845 propeller pair - Right-and left-rotating propellerWe have also specially manufactured propeller mounts in the shop.
Technical Data
Diameter: 8" (20,32cm)
Slope: 4.5 "(11.43 cm)
Bore: 5mm
Delivery
..
3.90€
Ex Tax:3.20€
Model: tsr12465
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 6,5 V / DC
..
12.90€
Ex Tax:10.57€
Model: tsr12450
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 5 V / DC
Ou..
12.90€
Ex Tax:10.57€
Model: tsr124120
This is a DC/DC-converter with 12V output voltageAttention: not for the use on the FlightControl board - there a 5V type is used!
Technical data according to the manufacturer
Output voltage: 12 V / DC
Output current: 1 A
Type: Traco TSR1-24120
Pitch: 2.54 mm
Input voltage range: 15 - 36V / DC..
13.90€
Ex Tax:11.39€
Model: epp1245cf
This version uses chopped glas fiber. This makes the propeller stiffer, but also more brittle.EPP1245 propeller pair - right-and left-rotating propellerWe have also specially manufactured propeller mounts in the shop.
Technical Data
Diameter: 12" (30,48cm)
Slope: 4.5 "(11.43 cm)
Bore: 5mm
Delivery..
5.90€
Ex Tax:4.84€
Model: verteileroktox
This is a Okto XL power distribution printed circuit board for 8 BL-Ctrls. The use reduces the wiring effort in building a OktoKopters significantly.The 8 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus.You can assemble optional cooling plates. (included in..
38.90€
Ex Tax:31.89€
Model: crusbcable
CR-Camera USB Cable for Canon, Nikon dSLR or Ricoh GX-series Cameras CR-Camera USB Cable for Canon PowerShoot/dSLR, Nikon dSLR or Ricoh GX-series cameras (USB Mini-B type plug) if you intend to use USB/PTP or USB/CHDK method (default length 30cm/11.8" - 15g). Type of suitable USB connector on cam..
6.90€
Ex Tax:5.66€