![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: s800evomotorbl
Replacement motor for S800 EVO Original DJI.Black Prop CoverStator Size 41×14mm KV 400rpm/V Max Power 500W Weight 158g..
139.90€
Ex Tax:114.67€
Model: kw30esce
New advanced esc specialy made for our customers
This esc will not let u down on the field. DJI 100% compatible and preprogrammed. Just plug and play.Some Features:- 30A burst 40A- 3 to 4s- lightweight- Extreme low output resistance, super current endurance.- Multiple protection features: Low-volta..
15.90€
Ex Tax:13.03€
Brand: DJI
Model: phantomslefpro
As an innovative extension for the Phantom pilots DJI developed the new self-locking nut with the propeller with integrated advantage of the automatic tightening the propeller during the flight. Furthermore, the assembly is facilitated. With these new propellers, the concern of a parting propeller d..
7.90€
Ex Tax:6.48€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
11.90€
Ex Tax:9.75€
Model: ledflexrt
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"s ..
4.90€
Ex Tax:4.02€
Model: laver
Laver 30mm - M3aluminium 6061-T6 (anodized) Size : 30mm One pair weight: 3.1g..
9.90€
Ex Tax:8.11€
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: tubeho16
CF-tube holder 25-16
Material: aluminium 6061-T6
Total weight: 32.5g
Used aluminium blot
(2)One pair..
46.90€
Ex Tax:38.44€
Model: 583dbirubberdu
A great 3dBi rubber duck antenna. A pair of these (one vertical and one horizontal) is ideal for use with the DUO5800 if you don"t want to invest  in patch antennas just yet.
Frequency range(MHz) - 5725~5850
Bandwidth(MHz)- 125
Gain(dBi) - 3
Polarization - Vertical
Input impedance(Ω) -..
4.90€
Ex Tax:4.02€
Model: verteilerouadr
This is a power distribution printed circuit board for 4 BL-Ctrls to build a Quadro XL. The use reduces the wiring effort in building significantly. The 4 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the Fli..
34.90€
Ex Tax:28.61€
Model: mitn6mm3538
MK propeller mount with 6mm hub (M6 winding). Suitable for MK3538.Mounted is the propeller with a 6mm nut and a tooth washer (see pictures).
Delivery
1 propeller mount M6 and additional mounting material (see photo)..
8.90€
Ex Tax:7.30€
Model: wnkeladapter
With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter and/or larger mass in the outer regions.
delivery
2 adapters and screws for motor mounting...
7.90€
Ex Tax:6.48€