- Stock: In Stock
- Model: fc30
Proven technology has been integrated into a circuit board, equipped with new features and designed to be extensible for future requirements.
The Flight-Ctrl V3.0 has improved camera integration : In conjunction with our camera control (CAMCtrl) functions such as zoom or recording can be controlled. At the same time you get the MikroKopter telemetry feedback about the status of the camera.
With an optional Hot-shoe adapter the exact GPS triggering position will be stored in a separate data file on the integrated SD card.
To use a redundant system (ie 2 autopilot to increase security), a completely new communication interface (CAN bus) has been integrated. The user receives system information from both systems via telemetry.
The implementation of the CAN bus system opens up new possibilities for the future. Additional inputs and outputs, as well as a free UART interface are also integrated for future use. It will be activated via a software update.
A Redundant data bus (I2C & UART) for controlling the brushless motor is already provided by hardware.
Source code, libraries, protocols, and a special "compile" license are available for developers. For example, for integration or connection of additional sensors or hardware (Raspberry Pi, RTK applications, collision detection / avoidance, etc.)
Waypoint-planning and telemetry output is possible by a PC program, as well as the Android app MK tablet tool (MK-TT). For these function, a wireless data interface can be connected (Like RangeExternder etc) Telemetry and voice output via a HoTT or Jeti Tranmitter keeps you informed about the actual state of your MikroKopter (Altitude, distance, voltage, Speed, etc)
Of course, standard functions such as Position Hold, Coming Home and FailSafe functions are supported.
The electronics is equipped with a wide range of high quality sensors (gyroscopes, accelerometers, barometric pressure sensor). The autopilot can be used up to an altitude of 5000m Sealevel .
The built-in Flight recorder saves all important operating data onto the built-in micro-SD card. This data can be analyzed by a special tool. The flight path can be shown on Google Earth.
The servo outputs (for example, to connect a camera gimbal) are located on a small adapter board (TinyServo adapter). This can be mounted on an easily accessible position. An optional servo adapter with its own voltage regulator is available, for example to control more powerful servos.
the following navigation features are possible:
- Simulation of flights: the complete flight can be simulated incl. waypoints, manual flight by tranmitter, automatic camera releases etc.
- automatic PositionHold
- automatic ComingHome)
- waypoint flights incl. GPS-Positions altitudes within 250 from starting point (can be extended by a seperate license)
- automatic camera releases in certain distances
- failsafe-position for the case of RC-tranmission lost
- Point-Of-Interest: The camera points automatically to the POI
- automatic flight of pattern and areas
- automatic creation of panoramas
- writing a logfile on the SD-card with all important informations
- writing a camera-logfile for the camera releases -> for exaple with external trigger input (hot shoe contact)
Connectivity
- receiver with telemetry -> Display of all important data at HoTT or Jeti transmitter systems
- external servo outputs to control camera gimbals
- Connection of a trigger input (hot shoe contact) -> the camera release positions are logged in a seperate logfile
- Serial interface for connection to a wireless interface -> example for path-planning and configuration
- free serial port, for example, to connect to RTK GPS systems (by later software updates)
- three seperate I2C busses -> BL-controller, Compass, camera control etc.
- three analog inputs -> the values are recorded in the logfile
- trigger output for triggering a camera
- Connection for CAMCtrl -> controlling of SONY cameras incl. Zoom and feedback to the transmitter (REC, counters for photos, etc.)
- Switching output for led lights
- Redundant, serial data bus to the BL-V3 controllers
- CAN bus: for example, for connecting a redundant flight control or other periperals
- SD card slot: for the flight recorder, camera log files, configuration files, etc.
The new GPS module MKGPS V3.5 required (or an older MKGPS with external compass).
A MKUSB V3> is required for setup or firmware update.
delivery
- 1 FlightControl V3.0 (with integrated NaviControl), programmed and tested
- 1 TinyServo board with two (max:4) Servo outputs
- 1 Buzzer
- cables
Technical Data
- Dimension: ca. 67mm x 67mm
- Weight: ca. 32g
Notes
- only compatible since firmware version 2.14
- FlightCtrl should be mounted onto vibrations dampers. Please use the vibration dampers M3x15 from our shop (see below)
- MKGPS & MKUSB not inclusive
- GPS waypoint radius is max. 250m around the start point. ComingHome or PositionHold possible without range limit
- With a commercial license an expanded GPS waypoint radius and up to 100 waypoints are possible
- Please refer to the terms of use of the software
- A Installation manual exists only in digital format. Manual
- The electronic components have to be protected against moisture and humidity. When operating under such special conditions
- a corresponding varnish has resist to be used.
Links
Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.
When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:
- Company name
- The exact address of the company
- tax number
- Mandatory phone number (delivery service)
Choose a payment method:
- In summary
- TRR
- Paypal
- Leanpay
At the very end, carefully read the information about your order and confirm your choice.
The package will arrive at your address within 1-3 working days.
Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.
You can choose between three payment methods:
- Via the online bank or according to the estimate
- PayPal*
- Cash on delivery
- Lean pay
If the value of the package is less than €50, delivery within Slovenia via the delivery service is €5.90. For purchases over €50, delivery within Slovenia is free.
The delivery amount is calculated at the end of the purchase.
Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.
If you want to go through the return process, we kindly ask you to fill out the form here.
If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.
If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.
After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.
The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.
Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.
Yes, you can visit our store, where we will be happy to help you and present the product.
To rent products, please go to our website:rent.onedrone.com/storeor visit our store.
Contact us and we guarantee that you will receive all the necessary information.
Call us at the number:041 688 150
But contact us via e-mail:info@onedrone.si