%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: Mauch Electronic
Model: MAU2-042
This cable is for the PL 2-6S series BEC"s to connect to Pixhawk 2.1 or any flight controller with Molex / Clik-Mate / 2.0mm / 6p connector.
L = 150mm ..
6.48€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-041
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with DF13-6p connector.
For example:
Pixhawk 1, APM... etc.
L = 150mm ..
4.84€
Ex Tax:4.84€
Brand: Mauch Electronic
Model: MAU2-088
Mauch Standard Line Customized cable from HS-xxx-xx Sensor Board to Pixhawk / APM
The cable is made of AWG28 silicone wires with original Hirose DF13 connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided..
4.84€
Ex Tax:4.84€
Brand: Mauch Electronic
Model: MAU2-043
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with JST-GH 6p connector.
For example:
Pixhawk 3, PixRacer... etc.
L = 150mm ..
6.48€
Ex Tax:6.48€
Brand: DJI
Model: lirecoca
The DJI LightBridge operates in the 2.4 Ghz band to transmit live video back to the ground, so the radio controller has to either work through the LightBridge or has to work on another frequency, these radio cables work with Futaba trainer ports found on the Futaba 14SG Radio Combo with R7008SB Rece..
6.48€
Ex Tax:6.48€
Model: p2pa9
Phantom 2 FPV Cable & Hub Part 9..
10.57€
Ex Tax:10.57€
Brand: Gremsy
Model: GR-FDCC
T1/T3 - Flir Duo Pro R Control Cable is used to connect:
- PWM1 and PWM2 Remote Control
- Power in 12VDC
- Analog Video Output
Specification:
Cable length: 120mm
T1/T3 - Flir Duo Pro R Control Cable Diagram..
29.43€
Ex Tax:29.43€
Model: DJI-RO2-LCC
Overview
The LANC Control Cable controls cameras with a LANC port, such as the BMCC, Sony FS5, or Sony FS7, by connecting them to the RSS port on the Ronin 2"s Power Hub.
In the Box
Ronin 2 LANC Control Cable ×1
Compatibility
Ronin 2..
81.89€
Ex Tax:81.89€
Model: DJI-RO2-CBC
Overview
The CAN Bus Cable is used to connect the 14.4V Accessory Power Port on the Ronin 2 to the CAN1 port on a DJI A3 fight controller.
In the Box
Ronin 2 CAN BUS Cable ×1
Compatibility
Ronin 2
..
95.00€
Ex Tax:95.00€
Model: FF-RED-RCP
This cable allows users to gain access to RED’s Redlink Command Protocol via the ‘CTRL’ port on RED cameras. This allows users to control functions like ISO, Frame Rate, Color temp, and Focus and aperture on EF lenses all from up to 600+ feet away using the MÅVI Controller and MIMIC controller. T..
179.43€
Ex Tax:179.43€
Model: FF-LE-MO-CA
This lens cable features custom cable which is ultra thin and flexible for the most difficult camera installations where wire routing is challenging. It features a Molex Microfit connector on one end, and a LEMO 1B 7 Pin on the other end. With 3 of these cables users will be able to control 3 moto..
179.43€
Ex Tax:179.43€
Model: mavic-usb
Mavic - RC Cable (Standard Micro USB connector)..
8.11€
Ex Tax:8.11€