![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Brand: TBS
Model: tbsts
Shield the TBS CORE from any RF-noise that may appear from ESCs or other noisy equipment on board. Also shields the UHF receiver from interference from the TBS CORE. A neat little add-on for the long-range afficionados!..
11.90€
Ex Tax:9.75€
Out of stock
Model: ledflexye
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.90€
Ex Tax:4.02€
Model: ledflexgr
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.90€
Ex Tax:4.02€
Model: clipc
Scope of Delivery 4 pieces.I in order specify for which motor u want them:KW2, 4, 8, 10..
3.90€
Ex Tax:3.20€
Brand: TBS
Model: tbslove
TBS Loveseat (antivibration)
Fight vibrations by placing your GoPro Camera on the TBS Loveseat. Fits the front lip perfectly, cushions your GoPro and thus fights vibrations. Made from memory foam, same material that ear plugs are made out of, which has been known since day one to be a good vibra..
8.90€
Ex Tax:7.30€
Model: canbus
Can bus hub for DJI Wookong M.To use multiple CAN devices such Zenmuse, IOSD and data link requires you to expand a HUB connections to the CAN bus system...
11.90€
Ex Tax:9.75€
Model: ledflexrt
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"s ..
4.90€
Ex Tax:4.02€
Model: laver
Laver 30mm - M3aluminium 6061-T6 (anodized) Size : 30mm One pair weight: 3.1g..
9.90€
Ex Tax:8.11€
Out of stock
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: mitn6mm3538
MK propeller mount with 6mm hub (M6 winding). Suitable for MK3538.Mounted is the propeller with a 6mm nut and a tooth washer (see pictures).
Delivery
1 propeller mount M6 and additional mounting material (see photo)..
8.90€
Ex Tax:7.30€
Model: wnkeladapter
With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter and/or larger mass in the outer regions.
delivery
2 adapters and screws for motor mounting...
7.90€
Ex Tax:6.48€