![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: mt60
The MT60 3 Pole Motor Connector set is the perfect solution for securing your brushless motor / ESC connections. The connector set features male and female connectors which are both fitted with 3.5mm bullets and supplied with a cable tidy attachment to keep things nice and neat!The connectors are ma..
3.20€
Ex Tax:3.20€
Out of stock
Model: biggrips
Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. T..
7.30€
Ex Tax:7.30€
Brand: Connex
Model: contele
The Connex Telemetry Cable allows transmission of Telemetry information from MAVLink based Flight Controllers. The cable connectors are 6 pins (Air Unit) to 4 pins (Flight Controller)...
10.57€
Ex Tax:10.57€
Brand: Connex
Model: connexsbus
Amimon CONNEX - CAN-BUS-Cable for OSDCONNEX now adds the support for telemetry input from DJI?s A2 and Naza flight controllers.Length: 50cmIn the box: 1x CAN-BUS Cable for telemetry support..
16.31€
Ex Tax:16.31€
Model: usb3
The MKUSB is an interface to connect the MikroKopter with an Computer via the USB port. Its used for configuration, telemtry and firmware update of the MikroKopter. This version V3 is for the use with our new Flight-Ctrl V3.0. By placing a jumper, the target board can be supplied with 5V if neede..
15.49€
Ex Tax:15.49€
Model: tseradapt
The MKUSB is an interface to connect the MikroKopter with an Computer via the USB port. Its used for configuration, telemtry and firmware update of the MikroKopter. This version V3 is for the use with our new Flight-Ctrl V3.0. By placing a jumper, the target board can be supplied with 5V if neede..
8.93€
Ex Tax:8.93€
Model: redronin
Used to connect the Ronin & Ronin-M Battery Power Distributor to a RED camera or another camera with the same connector port. The RED power cable is also compatible with the Ronin and Ronin-M gimbal and has a length of 50 cm...
82.70€
Ex Tax:82.70€
Model: gentgh4
For Panasonic GH4, GH5 cameras and camcorders with remote interface: gentWIRE-panaJK2.5 allows control of record, shutter half / full press, and zoom
Each device uses up to two RC channels to enable remote control.
gentWIRE-panaJK2.5 (151)Using up to 2 RC channels, allows control of the following ..
62.21€
Ex Tax:62.21€
Brand: Connex
Model: amn_cbl_071a
With this cable you can display data of your flight controller in your goggles or on your monitor...
8.11€
Ex Tax:8.11€
Brand: Connex
Model: amn_cbl_066a
With this cable you can display data of your flight controller in your goggles or on your monitor...
8.11€
Ex Tax:8.11€
Model: alexamp
Silicon Soft Power cable for Alexa Mini - lenght 1m.
Original connector is D-tap, but we can install some other connector too...
89.26€
Ex Tax:89.26€
Model: RILSAN3-X50
Rilsan cable tie 150mmx3mm per 50pces bag.
Rilsan cable ties are essential to fix the different elements of your multirotors.
To fix ESC, FPV system and other ...
Specifications
Material : ..
2.38€
Ex Tax:2.38€