![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: GP104944
GEP-F722 45A V2 AIO adopts STM32F722 MCU with powerful performance and higher computing speed.
BLHeli_S ESC can handle 45A continuous current, supports 2-6S LiPo voltage, and brings stronger flight performance to the drone.
This GEPRC AIO is 25.5*25.5mm mounting, has a 16MB blackbox, and supports Ds..
131.90€
Brez DDV:108.11€
Model: 01040016_1
BetaFPV"s G473 brushless AIO is the first 1S using the STM32G473CEU6.
Equipped with the ICM42688P gyroscope, 5A ESC and 5.8G 25-400mW VTX, this AIO is very lightweight and will allow you to manage your drone"s posture and movement precisely to a higher level.
This is the advanced choice for future u..
52.90€
Brez DDV:43.36€
Model: HDZ5000
HDZero AIO5 is the world"s first digital video AIO to link and fly 65mm whoops.
This HDZero X Happymodel collaboration integrates an F4 flight controller, an HDZero 5.8GHz digital video transmitter, a 2.4GHz ExpressLRS 3.0 SPI receiver, a 4in1 ESC with DSHOT protocol and a 5V/1A BEC. The minimum vol..
127.90€
Brez DDV:104.84€
Model: 0110003154
Replacement ExpressLRS 2.4G AIO for Tinyhawk III Plus.
Included
1x AIO
1x Power cable with capacitor
Voir plus..
69.90€
Brez DDV:57.30€
Model: 01040015_1
This AIO F4 2-3S 20A V1 from BetaFPV is specially designed for VTX HD.
This powerful controller integrates an STM32F405RGT6 MCU and dual BEC 9V 12A for DJI O3 and 5V 3A for external devices.
It is equipped with an integrated ExpressLRS 2.4G receiver, a 16MB blackbox and a barometer.
Specificatio..
62.90€
Brez DDV:51.56€
Model: GP106347
GEPRC"s AIO TAKER G4 45A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 45A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
76.90€
Brez DDV:63.03€
Model: FW19003108
With the increasing popularity of digital transmission, Flywoo presents an innovative solution for 1-2S HD micro drones.
This GOKU F405 HD V2 AIO integrates a Type-C interface, equipped with a high-performance F405 BGA MCU and offers enough UARTs to meet all your needs.
It effectively prevents power..
97.90€
Brez DDV:80.25€
Model: GP106153
The AIO TAKER F411 12A has built-in ExpressLRS 2.4G 3.0 receiver, it is perfect for 1.2-2" whoops or even 3" Toothpicks.
It consists of a BMI270 gyro, an 8Mb blackbox and supports Dshot300/600, Oneshot, MultiShot and 1-2S LiPo/LiHV voltage.
Upon receiving your FC,please connect to USB and calibrate..
70.90€
Brez DDV:58.11€
Model: GP106088
GEPRC"s AIO TAKER G4 35A adopts G473 main control.
Following market demands, the Type-C interface has been improved and everything has been optimized to make soldering easier.
The Taker G4 35A mounts in 25.5x25.5mm, has an ICM42688P gyro, AT7456Ev OSD, 5V 3A BEC and supports Dshot600, Oneshot and Mu..
67.90€
Brez DDV:55.66€
Model: SKY-150753
This AIO F405 40A from Skystars is mounted in 25.5x25.5mm and is powered by 3-6S LiPos.
Featuring an MPU6000 gyro, a 16Mb blackbox, a built-in barometer and a 5V 3A BEC, it is ideal for 3-4" whoops and light 5" whoops.
It is also equipped with an aluminum heat sink on each side to dissipate heat whi..
79.90€
Brez DDV:65.49€
Model: JH61709
This Mamba MK5 G4 6S 40A AIO from Diatone mounts in 25.5x25.5mm and only supports Alpha, not BetaFlight.
HD and analog compatible, this AIO has an OSD, TVS protection and 4 UARTS.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Specificatio..
100.90€
Brez DDV:82.70€
Model: 2D30052
This PNP X12 flight controller is all-in-one.
Specifications
Betaflight firmware target : CRAZYBEEF4DX
Gyro : ICM20689
On board ESC ..
80.90€
Brez DDV:66.31€