![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: GR-T3V3-BK
T3V3 - Hotshoe Plate
x1
T3V3 - Hotshoe Screw
x1
T3V3 - Hotshoe Extension
x1
T3V3 - Auxiliary Cable
x2
T3V3 - Power Supply Cable
x1
T3V3 - SBUS Cable
x1
T3V3 - Camera Screws
x2
M4 x 9 Thumbsrew (Left)
x1
M4 x 9 Thumbscrew (Right)
x3
M4 x 11mm Thumbscrew (Right)
x1
M3 x 8mm Screws
..
139.90€
Ex Tax:114.67€
Model: GA-ML
Ultra light Micro Lipo 1S (4,2V) 600mA for powering R/C RX, parachute, servo, ...
Dimension: 40x22mm, weight few grams...
10.90€
Ex Tax:8.93€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Model: MAU2-061
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup.
The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment.
REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
8.90€
Ex Tax:7.30€
Brand: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Ex Tax:4.84€
Showing 1 to 6 of 6 (1 Pages)