Išči

Išči

Iskalni kriterij

Išči v podkategorijah

Išči v opisu izdelka

Izdelki, ki se ujemajo s kriterijem iskanja

Primerjava0

Razvrsti po:

Prikaži:

Hitri pregled

Model: GR-T3V3-BK

Gremsy T3 V3 backup kit

T3V3 - Hotshoe Plate x1 T3V3 - Hotshoe Screw x1 T3V3 - Hotshoe Extension x1 T3V3 - Auxiliary Cable x2 T3V3 - Power Supply Cable x1 T3V3 - SBUS Cable x1 T3V3 - Camera Screws x2 M4 x 9 Thumbsrew (Left) x1 M4 x 9 Thumbscrew (Right) x3 M4 x 11mm Thumbscrew (Right) x1 M3 x 8mm Screws ..

131.89€

Brez DDV:131.89€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: GA-ML

Backup Micro Lipo 1S R/C, Parachute, Servo

Ultra light Micro Lipo 1S (4,2V) 600mA for powering R/C RX, parachute, servo, ... Dimension: 40x22mm, weight few grams...

8.93€

Brez DDV:8.93€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-085

Mauch Standard Line 4-14S Backup BEC for Pixhawk 2

This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage). Input and output is protected by Panasonic FC / FM capacitors. Input 4-14S LiPo / max. 60V. Ou..

45.82€

Brez DDV:45.82€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-083

Mauch Standard Line 2-6S Backup BEC for Pixhawk 2

Input 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes. 20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..

26.15€

Brez DDV:26.15€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Model: MAU2-061

Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm

Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup. The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment. REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..

7.30€

Brez DDV:7.30€