%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: SB-BEE35FRM
The Bee35 Pro from Speedybee is the perfect tool for any Cinewhoop rider looking for a freestyle frame that can effectively withstand impact. The frame is available for 20*20mm, 25.5*25.5mm and 30.5*30.5mm sizes.
The PRO version adds a standard aluminum alloy heatsink.
Compatible with the DJI O3 HD ..
40.90€
Brez DDV:40.90€
Model: SB-M5V2-FRAME
The Master 5 V2 Frame Kit by Speedybee has been designed to handle both freestyle or cinematic flying. It features Deadcat geometry and is available in 20*20mm and 30.5*30.5mm sizes.
Compatible with the DJI O3 HD system and recommended for use with 5" or 5.1" propellers, the Master 5 V2 not only fea..
74.51€
Brez DDV:74.51€
Model: M5V2-ARM-F
Front arm designed for the SpeedyBee Master 5 V2 frame.
Included
1x Front Arm For Master 5 V2
Voir plus..
6.48€
Brez DDV:6.48€
Model: SB-MARIO5-CF-JB-XH
Arm designed for the SpeedyBee Mario 5 XH frame.
Included
1x Arm
Voir plus..
5.66€
Brez DDV:5.66€
Model: SB-MARIO5-CF-JB-DC
Arm designed for the SpeedyBee Mario 5 DeadCat frame.
Included
1x Arm
Voir plus..
5.66€
Brez DDV:5.66€
Model: MF8D-FRAME
SpeedyBee"s Mario 8 could be one of the best-designed foldable Long Range frames, especially given its size and build quality.
Designed for long-range FPV flight, this 8" stands out for its extended flight range, stability and portability. The Mario 8 fold is O3 compatible.
Specifications
Wheel..
85.98€
Brez DDV:85.98€
Model: M5V2-ARM-B
Back arm designed for the SpeedyBee Master 5 V2 frame.
Included
1x Back Arm For Master 5 V2
Voir plus..
6.48€
Brez DDV:6.48€
Model: SB-F405WING-MINI
The F405 WING Mini flight controller from SpeedyBee is intended for airplanes as well as FPV quads.
Compatible with most HD and analog VTXs, this FC consists of an STM32F405 processor, an ICM-42688P gyroscope, an SPL006-001 barometer, an AT7456E OSD as well as 6 UARTS.
In addition to supporting INAV..
40.08€
Brez DDV:40.08€
Model: SB-BLS-55A
The SpeedyBee BLHeli_S 55A 4in1 ESC mounts in 30.5x30.5mm, has a TVS protection diode and supports DSHOT300/600, a voltage of 3-6S and has BLHeli_S J-H-40 firmware.
Specifications
Firmware : BLHeli_S J-H-40
Wireless Configuration : Full Configuration Supported in the SpeedyBee app
Continuous C..
44.18€
Brez DDV:44.18€
Model: SB-F405-V4
The SpeedyBee F405 V4 flight controller mounts in 30.5x30.5mm, configures via Bluetooth and is compatible with the DJI O3 / Runcam Link / Caddx Vista and DJi air unit VTX.
The FC is equipped with an ICM42688P gyro, a USB Type-C port, a barometer and an ATZ456E OSD.
Specifications
MCU : STM32F4..
40.08€
Brez DDV:40.08€
Model: SB-F4V4-55-STACK
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 55A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro.
The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good perfo..
65.49€
Brez DDV:65.49€
Model: SB-F4MINI-STACK
New mini stack from SpeedyBee, the F405 mini BLHeli_S 35A.
This stack includes a F405 mini 20x20 flight controller equipped with an 8Mb blackbox, an ICM42688P gyroscope, a barometer, an OSD and supports Bluetooth.
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage..
61.39€
Brez DDV:61.39€