![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: BF15447
This Iflight stack is mounted in 20*20mm, it consists of an ATF435 FC and an E55 ESC.
This Blitz Mini ATF435 55A has a BMI270 gyro, a DPS310 barometer, an AT7456E OSD chip and supports a 2-6S LiPo voltage.
FC Specifications
MCU: AT32F435RGT7
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flas..
81.90€
Brez DDV:67.13€
Model: KIT-SCREW-DFR
Practical and complete, this screw kit includes a 4in1 hexagonal screwdriver (1.5/2/2.5/3) as well as 16 types of M2/M3 screws.
Impossible to lose the hexagonal bits since they are stored inside the screwdriver with the Drone-FPV-Racer logo.
Also benefit from 11 screw compartments for optimal storag..
21.90€
Brez DDV:17.95€
Model: LUCID-F60A-ESC
Here is the latest 4in1 ESC made by Team BlackSheep, the Lucid F60A AM32 is based on AM32 firmware, is compatible with 3-6S LiPo voltage and supports Dshot 300/600 bi-directional protocols and KISS ESC telemetry.
An aluminum mount is included to give you the choice between mounting in 20*20mm or 30...
64.90€
Brez DDV:53.20€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
103.90€
Brez DDV:85.16€
Model: ES666
The Sequre ES666 screwdriver is the smart and innovative tool you"ve been missing. This multifunctional electric screwdriver supports sensing, fixed and automatic modes, which breaks traditional concepts.
The ES666 has many features such as angle detection, sensitivity adjustment, front-facing LEDs,..
53.90€
Brez DDV:44.18€
Model: WL-07-7
Flurescent non-slip 250x16mm battery strap by Gemfan.
Equipped with a metal buckle as well as a velcro and a reinforced fabric, it will securely fix your lipos on you frame.
Sold unit...
2.90€
Brez DDV:2.38€
Model: AR0056465
Windscreen to add to your DJI Mic 2 to reduce wind and ambient noise.
Included
1x DJI Mic 2 Windscreen
Voir plus..
10.90€
Brez DDV:8.93€
Model: 01130003_3
This set of 15 PEEK screws will allow you to reduce the weight of your whoop.
Stronger, stronger and more durable than nylon screws, these screws save up to 0.46g for construction using metal screws.
PEEK screws are therefore perfect for building 65/75mm whoops such as the Meteor.
Included
15x ..
8.90€
Brez DDV:7.30€
Model: PIRAT-MATEY2-SACHETVIS
Screw bag for the Lil"Matey2 (3.5") from PiratFrames.
Included
8x Torx countersunk head screws M3*8mm
8x Torx countersunk head screws M3*10mm
6x Torx countersunk head screws M3*12mm
6x M3*10mm Button Head Torx Screws
4x Hexagonal pressnut
5x Button head screws M1.6*8mm
Voir plus..
6.90€
Brez DDV:5.66€
Model: PIRAT-P&S-SCREWBAG
Screws kit intended for Punch and Shorty frames from PiratFrames.
Included
8x M3X8mm torx countersunk 12.9 steel black screw
6x M3X10mm torx countersunk 12.9 steel black screw
10x M3X12mm torx countersunk 12.9 steel black screw
6x M3X16mm torx countersunk 12.9 steel black screw
5x M3X20mm to..
13.90€
Brez DDV:11.39€
Model: W4-FW060006-M1M1-TX1
The Flycolor Trinx G20 32Bit 60A 3-6S 20x20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience for high-end FPV.
Bullet Points
PWM frequency up to 64 MHz.
Optimized firmware ..
95.90€
Brez DDV:78.61€
Model: W4-FW045006-G1G1-TX01
Check out the Flycolor Trinx G5 45A 4-in-1 ESC with 45A of continuous current support, you will have plenty of headroom to push your rig to the limit.
With the high-powered MCU and Raptor 5 firmware, this is a path towards the next level for your builds!
Bullet Points
PWM frequency up to 128K..
79.90€
Brez DDV:65.49€