![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: GAN-65W
High-speed charging guaranteed!
This 65W wall charger (EU plug) is equipped with a USB-C PD port as well as a QC3.0, it is perfect for your Whoopstor V3!
Charge your devices such as the iPhone (14/13/12/11 Pro max), Xiaomi or any other device that supports USB-C.
Portable and suitable for travel, th..
14.90€
Brez DDV:12.21€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Brez DDV:4.84€
Model: NMB-BEARING-NT
This set of 10 NMB 9x4x4 bearings will allow you to replace those that are too worn in your motors starting to squeak a little too much over crashes with humidity.
Compatible with a large majority of 5" motors, remember to measure your current bearings using a caliper to be sure of the correct sizin..
20.90€
Brez DDV:17.13€
Model: ADHESIVE-TAPE
This 1 meter roll of double adhesive is the perfect accessory for your builds or any other miscellaneous task.
Specifications
Color : Transparent
Length : 1 meter
Width : 20mm
Thickness : 2mm
Included
1x Nano Double-Sided Adhesive Tape
Voir plus..
4.90€
Brez DDV:4.02€
Model: DAMPERS-M3-NINJA
Set of 10 M3 dampers.
Specifications
External Diameter: 6mm
Internal Diameter: 3mm
Height : 4~5mm
..
1.90€
Brez DDV:1.56€
Model: MCX-SMA-GOGGLES2
These MCX to SMA adapters will allow you to install any type of SMA antenna on your DJI Goggles 2.
Specifications
Connector : MCX t..
5.90€
Brez DDV:4.84€
Model: MCX-RPSMA-GOGGLES2
These MCX to RP-SMA adapters will allow you to install any type of RP-SMA antenna on your DJI Goggles 2.
Specifications
Connector :..
5.90€
Brez DDV:4.84€
Model: LED-RACE-WIRE
Set of 4 Led Race wire plus 4 heatshrink tube.
Available in white, red, green and blue.
These race wire LEDs are not RGB addressable via Betaflight, so you have to choose the color you want from those offered.
The intensity of the LED will vary depending on the gas of the motors.
..
7.90€
Brez DDV:6.48€
Model: NINJA-1M-IOS
Cable with a length of one meter type-C to iOS 90°.
Bullet points
Compatible with all USB Type-C powered hardware or cameras
Length :..
6.90€
Brez DDV:5.66€
Model: SWIFTFLYING-USBC-XT60-ADAPTER
This handy adapter switches your USB Type-C power to XT60, all while displaying the output voltage. This will allow you to test your drones without using your charged batteries.
Note: to change the output voltage (on the XT60 female side), all you need to do is:
- To press the button while pluggin..
10.90€
Brez DDV:8.93€
Model: SILICON-CAPS-MICRO-USB
Protect your micro USB outlets with these silicone caps from NinjaTech.
Sold in sets of 10.
Specifications
Matérial : Silicon
Color..
1.90€
Brez DDV:1.56€
Model: SILICON-CAPS-USBC
Protect your USB-C outlets with these silicone caps from NinjaTech.
Sold in sets of 10.
Specifications
Matérial : Silicon
Color : B..
1.90€
Brez DDV:1.56€