![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: GAN-65W
High-speed charging guaranteed!
This 65W wall charger (EU plug) is equipped with a USB-C PD port as well as a QC3.0, it is perfect for your Whoopstor V3!
Charge your devices such as the iPhone (14/13/12/11 Pro max), Xiaomi or any other device that supports USB-C.
Portable and suitable for travel, th..
14.90€
Brez DDV:12.21€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Brez DDV:4.84€
Model: NMB-BEARING-NT
This set of 10 NMB 9x4x4 bearings will allow you to replace those that are too worn in your motors starting to squeak a little too much over crashes with humidity.
Compatible with a large majority of 5" motors, remember to measure your current bearings using a caliper to be sure of the correct sizin..
20.90€
Brez DDV:17.13€
Model: ADHESIVE-TAPE
This 1 meter roll of double adhesive is the perfect accessory for your builds or any other miscellaneous task.
Specifications
Color : Transparent
Length : 1 meter
Width : 20mm
Thickness : 2mm
Included
1x Nano Double-Sided Adhesive Tape
Voir plus..
4.90€
Brez DDV:4.02€
Model: DJI-RC-N-USB-1
OverviewThe RC Cable connects the Remote Controller to a mobile device via the USB Lightning.
Highlights
Well designed and convenient for storage
In The BoxRemote Controller Cable × 1
CompatibilityDJI RC-N1 Remote ControllerDJI RC-N2 Remote Controller..
15.90€
Brez DDV:13.03€
Blagovna znamka: X-Nova
Model: V2-22035-2400-X4
XNova make it again with a new range of motors for the Race, the Lightning V2N 2203.5!
Pilots who have tested these motors are unanimous, power and acceleration never seen before!
..
82.90€
Brez DDV:67.95€
Blagovna znamka: X-Nova
Model: V2-22035-1800-X4
XNova make it again with a new range of motors for the Race, the Lightning V2N 2203.5!
Pilots who have tested these motors are unanimous, power and acceleration never seen before!
..
82.90€
Brez DDV:67.95€
Model: DAMPERS-M3-NINJA
Set of 10 M3 dampers.
Specifications
External Diameter: 6mm
Internal Diameter: 3mm
Height : 4~5mm
..
1.90€
Brez DDV:1.56€
Model: DJI-RO4D-F
DJI Ronin 4 D Flex
Extendable Gimbal CameraThis extendable solution not only reduces handheld weight, but also enhances shooting flexibility and supports more lens options.
2m Extension CableCamera position possibilities are much more flexible. Especially useful for through-shots and movements in na..
958.90€
Brez DDV:785.98€
Model: DJI-4D-HGC
DJI Ronin 4D / Transmission Hand Grips Combo
OverviewMounted to the left and right sides of the Ronin 4D main body or the High-Bright Remote Monitor to remotely enable focus control, high-precision gimbal control, starting and stopping of recording, and adjustment of camera parameters, to meet the n..
691.90€
Brez DDV:567.13€
Model: V2-22035-2800-UNIT
XNova make it again with a new range of motors for the Race, the Lightning V2N 2203.5!
Pilots who have tested these motors are unanimous, power and acceleration never seen before!
..
21.90€
Brez DDV:17.95€
Model: MCX-SMA-GOGGLES2
These MCX to SMA adapters will allow you to install any type of SMA antenna on your DJI Goggles 2.
Specifications
Connector : MCX t..
5.90€
Brez DDV:4.84€