![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: 45MMX2GR-PC-1.5MM
HQProp 45MMX2 polycarbonate propellers with a 1.5mm pressure shaft.
Specifications
Propeller Diameter: 1.6inch (40mm)
Pitch : 0.9
Blades : 2
Material : Poly carbonate
Weight : 0.25g
Hub Diameter :4mm
Hub Thickness: 5mm
Shaft :1.5mm
Adaptor Rings : NO
Included
2..
2.90€
Brez DDV:2.38€
Model: 45MMX3GR-PC-1.5MM
HQProp 45MMX3 polycarbonate propellers with a 1.5mm pressure shaft.
Specifications
Propeller Diameter: 1.6inch (40mm)
Pitch : 0.9
Blades : 3
Material : Poly carbonate
Weight : 0.33g
Hub Diameter :4mm
Hub Thickness: 5mm
Shaft :1.5mm
Adaptor Rings : NO
Included
2..
2.90€
Brez DDV:2.38€
Model: HQPROP-DT63MMX5
The HQProp propellers are of very good quality and allow very good performances. Durable version in Polycarbonate.
Specifications
Pro..
3.90€
Brez DDV:3.20€
Model: HQPROP-DT63MMX4
The HQProp propellers are of very good quality and allow very good performances. Durable version in Polycarbonate.
Specifications
Pro..
2.90€
Brez DDV:2.38€
Model: HQPROP-DT63MMX3-V2
The HQProp propellers are of very good quality and allow very good performances. Durable version in Polycarbonate.
Specifications
Pro..
3.90€
Brez DDV:3.20€
Model: GF-MS-G2
MicaSense - DJI Matrice 300 (M300) Quick Mount Kit Gen 2 for Rededge-MX
A professional, easy-to-use solution for mounting and powering the RedEdge-MX sensor on the DJI Matrice 300. Secure your sensor and DLS 2 to the M300 and connect it to drone power in four simple steps:
Attach Quick Mount adapte..
716.90€
Brez DDV:587.62€
Model: 4WD-CC-MX4-P
The MX4 Pro is Dynamic, low angle tracking shoots at speeds up to 45mph(70km/g). The MX4 Pro use sensored motor and ESC, which is running smooth at low speed and when starting.It can install Freefly MOVI, SHOTOVER, Ronin 2, Ronin RS2 gimbals. The max.load is 60lb(30kg). It not only can start and sto..
4,505.90€
Brez DDV:3,693.36€
Model: DJI-RO-270
This Counterweight (270g) is part of the Ronin-M & Ronin-MX Counterweight Set. The Counterweight Mounting Plate is required for mounting onto your Ronin.If unable to balance your Ronin using all parts of the Counterweight Set, purchase extra Counterweights as required...
49.90€
Brez DDV:40.90€
Model: DJI-RO-180
This Counterweight (180g) is part of the Ronin-M & Ronin-MX Counterweight Set. The Counterweight Mounting Plate or Upper Mounting Plate for a Cine Camera is required for mounting onto your Ronin. It can also be mounted on the left or right side of the Counterweight (270g) to maximize the tilt angle...
45.90€
Brez DDV:37.62€
Blagovna znamka: DJI
Model: DJI-ROX-GRIP
Hold a Ronin-M or Ronin-MX more easily and lean it against vertical surfaces when not in use. Also useful for different carrying styles and passing the Ronin between camera operators. Expansion screws available for personal optimization...
269.90€
Brez DDV:221.23€
Model: mxred
Accessory Kit for RED is used to secure the RED camera on the Ronin-MX gimbal...
50.90€
Brez DDV:41.72€
Hot
Model: rssbmcc
RSS Control Cable for BMCC is used to connect Remote Start/Stop Camera Port to BMCC cameras...
9.90€
Brez DDV:8.11€