![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: AR0056915
Link your DJI Power charging station with a solar panel using this DJI adapter module.
It allows you to adapt up to three solar panels to recharge the DJI Power 500 or 1000.
Note: Once the module is plugged in, be sure to install the metal heat dissipation brackets to ensure safety.
If you..
63.90€
Brez DDV:52.38€
Model: AR0056876
This adapter was designed by DJI to be able to connect the DJI Mic 2 to Sony cameras without using a 3.5mm TRS cable.
Its design allows it to be installed in the shoe of the Sony device where you can attach the DJI Mic 2 receiver.
As a result, the latter will be connected to the adapter interface an..
37.90€
Brez DDV:31.07€
Model: AR0056462
This adapter attaches to the DJI Mic 2 and allows you to connect it to your smartphone.
The type-C version is intended for Android devices while the lightning version is compatible with Apple smartphones.
Included
1x Adapter
Voir plus..
21.90€
Brez DDV:17.95€
Model: SP40
This carbon adapter for DJI O3 from RushFPV allows good cooling of the VTX by increasing the heat dissipation space.
The plate is mounted in 20x20mm (M2) or 25.5x25.5mm (M1.6).
Included
1x Plate
5x Screw
Voir plus..
4.90€
Brez DDV:4.02€
Model: GORILLA-30X30
This adapter allows the mounting of the Lucid 6S TBS stack on any 30x30mm frame.
Included
2x TBS Gorilla to 30x30 mounting adapter
4x M2x10 screw for stack mount
4x M3x6 screw for frame mount
Note : Stack not included
Voir plus..
5.90€
Brez DDV:4.84€
Model: GORILLA-20X20
This adapter allows the mounting of the Lucid 6S TBS stack on any 20x20mm frame.
Included
2x TBS Gorilla to 20x20 mounting adapter
4x M2x10 screw for stack mount
4x M3x6 screw for frame mount
Note : Stack not included
Voir plus..
5.90€
Brez DDV:4.84€
Model: C006559
Micro USB adapter L-Type male to female for flight controller.
Specification
Weight: 1.1g
Size: 27*9*12mm
Features
Micro USB Male to Female
L-type will be more convenient to change the direction of the data cable
Support data transmission, synchronization function
Voir plus..
3.90€
Brez DDV:3.20€
Model: ADAP-RPSMA45
Adapter type RP-SMA angled 45°.
Sold individually...
4.90€
Brez DDV:4.02€
Model: GP-HEX35-TPUBYDFR
This TPU adapter is intended to install a GoPro on your Aikon Hex35.
Specifications
Material : TPU
Compatibility : HEX35
Weight : ~7.8g (with screw and nut)
Voir plus..
5.90€
Brez DDV:4.84€
Model: 01130005_3
BetaFPV"s BT3.0 connectors are designed for 2S batteries.
3 metal pins help balance power when charging without additional balancing connector.
You are a 2S quad pilot, these lighter connectors than regular connectors are a more practical choice and the best option to lose a few more grams on your q..
9.90€
Brez DDV:8.11€
Model: ADAPT-Y-SERIE
It can be practical to have this type of cable in order to increase the total capacity of two lipo batteries or to increase their voltage.
The male XT60 connectors are for connecting the two batteries and the female XT60 connector will power the drone.
- If you want to connect two identical batt..
3.90€
Brez DDV:3.20€
Model: ADAPT-Y-PARALLELE
It can be practical to have this type of cable in order to increase the total capacity of two lipo batteries or to increase their voltage.
The male XT60 connectors are for connecting the two batteries and the female XT60 connector will power the drone.
- If you want to connect two identical batt..
3.90€
Brez DDV:3.20€