Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
DJI Avata 2 Fly More Combo, pure adrenaline!
Treat yourself to an immersive and stimulating FPV drone experience with optimized image, security and a..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
The Sony VTC5A battery has an autonomy of 2600mAh and a pulse discharge current of 35A (20A continuous).
Caution: It is imperative to transport your batteries in suitable cases to avoid any incident.
Store them away from heat sources as well and use a suitable charger to prevent short circuiting or ..
The Sony VTC6 battery has an autonomy of 3000mAh and a pulse discharge current of 30A (20A continuous).
Caution: It is imperative to transport your batteries in suitable cases to avoid any incident.
Store them away from heat sources as well and use a suitable charger to prevent short circuiting or d..
This bundle supports you in installing Sony RX100 on Pixy U, beneath the drone system, easily control by Seagull #REC via AUX gimbal port.
Pixy U
x1
Pixy Damping
x1
RX100 camera plate
x1
Seagull #REC
x1
MULTI - QR cable
x1
MULTI - AUX cable
x1
Right to straight Angle Micro HDMI Cable ..
Using the default 14.5V-2A from AUX port ( or 12V-5A of S1/S1V2 using UBEC) , the Dummy Battery (Sony NP-FZ100 type ) allows you to power for SONY mirrorless cameras, it is helpful for long time shooting. There is a built-in voltage transformer, support 10V-16V wide voltage input.
Specification:- In..
Using the default 12V from AUX port, the Dummy Battery allows you to power for S0NY mirrorless cameras, it is helpful for long time shooting.There is a built-in voltage transformer, support 10V-16V wide voltage input.
Specification:
Input Voltage: 10V-16V
Output Voltage: 8V
Output Current: 1A
Cable..
PWT port from Tilt case gimbal to NP-FW50 DC battery coupler cable allows you to power for S0NY mirrorless cameras, it is helpful for long time shooting.
There is a built-in voltage transformer, support 10V-16V wide voltage input.
You should need the S1-UBEC to switch power supply from drone to outp..