Vodilni sistem s tremi kameramiS kamero 4/3 CMOS Hasselblad, 70 mm tele kamero in 166 mm tele kamero vam Mavic 3 Pro pomaga ustvarjati osupljiva dela ..
Vodilni sistem s tremi kameramiS kamero 4/3 CMOS Hasselblad, 70 mm tele kamero in 166 mm tele kamero vam Mavic 3 Pro pomaga ustvarjati osupljiva dela ..
Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
MÅVI Dock
The compact, quick-folding MÅVI Dock allows MÅVI operators to keep their setup powered on while docking on a C-Stand. What"s more, users ..
The most advanced 5.8GHz Video Transmitter available today. Only 4 grams, and a slender 31 x 20mm, the TrampHV is also the smallest direct LiPo-powere..
Connect the communication ports on the Focus Remote Controller and the Osmo - X5 Adapter using the DJI Focus - Osmo Pro/RAW Adaptor Cable. Then, you c..
Osmo Action 5 ProBe All In - The Action Camera With Revolutionary Image QualityGet Into Revolutionary Imaging - Next-Gen 1/1.3″ SensorOur new sensor c..
Osmo Action 5 ProBe All In - The Action Camera With Revolutionary Image QualityGet Into Revolutionary Imaging - Next-Gen 1/1.3″ SensorOur new sensor c..
DJI Neo Two-Way Charging Hub
OverviewIt can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge three Intelli..
DJI Neo PropellersProvide efficient and stable propulsion for the aircraft.
Tips1. Mount the marked propellers onto the motors of the marked frame arm..
OverviewMount the DJI Focus Pro Hand Unit and the DJI High-Bright Remote Monitor (or third-party video transmission monitor) together, making it conve..
DJI DL 75 mm F1.8 Lens
OverviewThe DJI DL 75 mm F1.8 full-frame medium telephoto lens is designed for 8K cinematography and is natively compatible wit..
Do you want to practice FPV?Find out our full FPV Freestyle Kit.With this kit, you got all the equipment necessary to practice the discipline.
Charge ..
Set of 4 Led Race wire plus 4 heatshrink tube.
Available in white, red, green and blue.
These race wire LEDs are not RGB addressable via Betaflight, so you have to choose the color you want from those offered.
The intensity of the LED will vary depending on the gas of the motors.
..
Heat-Shrink sleeve in length of 1m
Available in 16 / 20 / 25mm (inner diameter).
Flat size of the ducts (not retracted) according to their diameter:
Ø16mm=2.7cm
Ø20mm=3.5cm
Ø25mm=4cm..
Heat-Shrink sleeve in length of 1m
Available in 1.5/3/5mm (inner diameter)
Note: The heat-shrink is uniform, opaque and without any inscription on it.
..
Assortment of red and black heat shrink tubing.
40x diameter 2mm x 30mm40x diameter 2.5mm x 60mm20x diameter 3.5mm x 60mm16x diameter 5mm x 60mm10x diameter 6mm x 60mm8x diameter 8mm x 100mm..
Set of waterproof heatshrink tubes.
Materials: tinned copper
Double wall design
Waterproof hot melt adhesive
Transparent sleeves
Heat-shrink tubing with high tensile strength
For unmanned an..
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription..
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription..
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription..