Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
DJI Avata 2 Fly More Combo, pure adrenaline!
Treat yourself to an immersive and stimulating FPV drone experience with optimized image, security and a..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
To complement their range of OpenTX multi-protocol transmitters, RADIOMASTER has introduced a range of receivers. These R series receivers are either compatible with Frsky D8 or D16 modes and are suitable for RC drones and aircraft, etc.The R86C-D8 PWM/SBUS receiver is a compact, full-range 6/8ch re..
RadioMaster - R168 8ch Frsky D16 Compatible PWM Receiver with Sbus.Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
FeaturesPWM, SBUS and S.Port OutputBattery voltage telemtry built in (Reads main flight battery voltage up to 18v)SpecificationsNumber of c..
Radiomaster R81 is a FrSky D8 compatible receiver with dual antennas, SBUS out, and a tiny size. Very similar to the FrSky XM+.Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories!
SpecificationsChannels: 8CHFrequency range: 2400-2483.5MhzPower input range: 4...
SBUS Joystick Module supports to control pan and tilt via SBUS protocol easier and more kinetic, even with only a single operator. Compatible with Gremsy T1/T3Highlight Feature:- Ability to control Pan/Tilt axis direction- Ability to control control speed of Pan/Tilt movement up to 10 levels- Abilit..
Description:Brand Name: FrskyItem Name: RX8RBand: 2.4GHz ACCSTChannel:В 16CH (1-8ch from conventional channel output, 1-16ch from SBUS port, or combine two RX8R to become a 16 channels receivers)Dimension: 46.25Г—26.6Г—14.2mm (LГ—WГ—H)Weight: 12.1g
With RSSI Output on Board: Analog 0-3.3V
Operating ..
The Connex SBUS Cable allows the user to output SBUS based messages to the Flight Controller. The Connex SBUS Cable connectors are 5 pins (Connex Air unit) to 3 pins (Flight Controller)...
FrSky ultra mini receiver R-XSR is the evolution of FrSky full range XSR receiver. The R-XSR is a standalone receiver with all the functions of XSR, in addition, it’s almost 1/3 size and 1/3 weight of XSR receiver. Moreover, there redundancy function is integrated into this tiny receiver ensures the..
The MAVLink / S.Bus Cable from Amimon allows the Air Unit to integrate telemetry data and control with the video downlink. This is ideal for FPV (first-person view) and ground station applications, as the telemetry data can be superimposed directly over the video image. Additionally, it enables cont..