Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
DJI Avata 2 Fly More Combo, pure adrenaline!
Treat yourself to an immersive and stimulating FPV drone experience with optimized image, security and a..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
The Castle Creations CC BEC 2.0 is the power solution for cinelifters video system.
The latter will give you higher voltage ranges.
This voltage regulator is perfect for powering servos, cameras and other power-hungry accessories.
The CC BEC 2.0 is the solution to protect your electronic components ..
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 12V accessories from the main batteries.
Features
XT30 Female connector for powering accessories
Pulls power from flight packs to simplify battery needs..
Generally the input voltage of FPV camera is 7~13V, When 4S LiPo is mounted, the linear regulator can convert 14~17V to 12V, and power camera & 12V 1W LED without ripple & noise.
25*10mm PDB, 1g, Small & Light.
Input: 4S LiPo, Output: 12V, Cont.300mA..
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 6,5 V / DC
..
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 5 V / DC
Ou..
This is a DC/DC-converter with 12V output voltageAttention: not for the use on the FlightControl board - there a 5V type is used!
Technical data according to the manufacturer
Output voltage: 12 V / DC
Output current: 1 A
Type: Traco TSR1-24120
Pitch: 2.54 mm
Input voltage range: 15 - 36V / DC..