Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
DJI Avata 2 Fly More Combo, pure adrenaline!
Treat yourself to an immersive and stimulating FPV drone experience with optimized image, security and a..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..