Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Complete and Ready-to-fly system for geo survey applicationsDelivery 2 weeks after placing order.
Kopterworx Geo RTF is a result of one year long test..
ULTRA-BRIGHTA maximum 2000 cd/m of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen deta..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
DJI Avata 2 Fly More Combo, pure adrenaline!
Treat yourself to an immersive and stimulating FPV drone experience with optimized image, security and a..
Break the distance and capture extraordinary images with the new MOZ7 series!
GEPRC"s MOZ7 is a 7.5" Long Range drone that continues the design conce..
You need a race frame specially designed for competition? The Racer is here!
This 5" GEPRC frame can accommodate a 20*20mm, 25.5*25.5mm or 30.5*30.5m..
The Taker F405 BLS 50A stack from GEPRC has been specially designed for DJI.
Use its STM32F405, the ICM42688P gyro, the integrated 16M blackbox and t..
The RAD 5.8G 2.5W high-power VTX has six adjustable power levels.
It can reach a maximum power of 2500W, the transmission signal is stable and the pen..
A must-have for Toothpick builds, the Rubber bands by TuneRC are a easy and neat way to secure and hold your batteries without having to use sticky ba..
The AOS 5 EVO is a lightweight drone designed with low-vibration technology.
This 5" quad is equipped with the DJI O3 HD air unit, a Blitz mini F722 ..
The Foxeer M10Q GPS has a QMC5883 compass and is GPS, GLONASS and Galileo compatible.
Very compact and very light, it will adapt perfectly to your drone, whatever the size.
The M10Q 180 will let you know the exact speed at which you are flying thanks to its speed accuracy of 0.05m/s.
..
The Foxeer M10Q GPS has a QMC5883 compass and is GPS, GLONASS and Galileo compatible.
Very compact and very light, it will adapt perfectly to your drone, whatever the size.
The M10Q 250 will let you know the exact speed at which you are flying thanks to its speed accuracy of 0.05m/s.
..
The Foxeer M10Q GPS has a QMC5883 compass and is GPS, GLONASS and Galileo compatible.
Very compact and very light, it will adapt perfectly to your drone, whatever the size.
Use the M10Q 120 to find your quad following a crash thanks to the last recorded location.
..
Matek"s M10Q-5883 uses a u-blox SAM-M10Q-00B powered GNSS module.
In addition to supporting simultaneous reception of four GNSS (GPS, GLONASS, Galileo, Beidou), the SAM-M10Q offers exceptional sensitivity and acquisition time for all GNSS L1 signals.
The M10Q-5883 will select the best signals thanks..
GPS with two interated compass-sensors: GPS/Glonass receiver of the latest generation with mounted GPS Shield and two integrated compass-sensors. It uses the normal American GPS satellites, but it can parallel receive the Russian GLONASS or chinese BeiDou satellite system. This increase the satell..
Flywoo"s GOKU GM10 V3 GPS series is here!
More precise positioning, the latest M10050 GNSS chip and increased search speed are the new and improved features compared to their GM8 V2 predecessors.
..
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and integrated compass (you don`t need an MK3Mag for this Navi) .In combination with a MKGPS, MikroKopter can navigate via GPS (e.g. waypoint navigation, position hold, coming home,...)The board is already assembled.The NaviCtrl..
This is an external compass for connection to the NaviCtrl. This module is used when the compass needs more distance to magnetic interferences. A correct compass value is essential for reliable navigation. The board can be connected to the NaviCtrl V2.1 directly from the Molexkabel. If the ext. ..
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and integrated compass (you don`t need an MK3Mag for this Navi) .In combination with a MKGPS, MikroKopter can navigate via GPS (e.g. waypoint navigation, position hold, coming home,...)The board is already assembled.The NaviCtrl..