Vodilni sistem s tremi kameramiS kamero 4/3 CMOS Hasselblad, 70 mm tele kamero in 166 mm tele kamero vam Mavic 3 Pro pomaga ustvarjati osupljiva dela ..
Vodilni sistem s tremi kameramiS kamero 4/3 CMOS Hasselblad, 70 mm tele kamero in 166 mm tele kamero vam Mavic 3 Pro pomaga ustvarjati osupljiva dela ..
Overview
The Mavic 2 Car Charger has a maximum output power of 80W, allowing you to charge batteries while driving. It features overheating protectio..
Monitor Mount PRO for Inspire This is a CNC machined, aluminum mount that allows you to mount any 1/4-20 monitor on to your Inpire transmitter. Use it..
Fusion Upgrade
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.You can conn..
Mio Damping is designed to match perfectly with the Mio gimbal and its payload where 8 silicone-filled rubber balls are used to further remove high-fr..
Adicam Ball Mount System 75mm/100mm
This set is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable fo..
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powe..
MÅVI Dock
The compact, quick-folding MÅVI Dock allows MÅVI operators to keep their setup powered on while docking on a C-Stand. What"s more, users ..
The most advanced 5.8GHz Video Transmitter available today. Only 4 grams, and a slender 31 x 20mm, the TrampHV is also the smallest direct LiPo-powere..
Connect the communication ports on the Focus Remote Controller and the Osmo - X5 Adapter using the DJI Focus - Osmo Pro/RAW Adaptor Cable. Then, you c..
Osmo Action 5 ProBe All In - The Action Camera With Revolutionary Image QualityGet Into Revolutionary Imaging - Next-Gen 1/1.3″ SensorOur new sensor c..
Osmo Action 5 ProBe All In - The Action Camera With Revolutionary Image QualityGet Into Revolutionary Imaging - Next-Gen 1/1.3″ SensorOur new sensor c..
DJI Neo Two-Way Charging Hub
OverviewIt can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge three Intelli..
DJI Neo PropellersProvide efficient and stable propulsion for the aircraft.
Tips1. Mount the marked propellers onto the motors of the marked frame arm..
OverviewMount the DJI Focus Pro Hand Unit and the DJI High-Bright Remote Monitor (or third-party video transmission monitor) together, making it conve..
DJI DL 75 mm F1.8 Lens
OverviewThe DJI DL 75 mm F1.8 full-frame medium telephoto lens is designed for 8K cinematography and is natively compatible wit..
Do you want to practice FPV?Find out our full FPV Freestyle Kit.With this kit, you got all the equipment necessary to practice the discipline.
Charge ..
250A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual..
This sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.
The main purpose of this hub is to replace ex..
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
50A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U.
Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BEC..
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
100A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..