Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: BOOSTYBOI
Fractal"s Boostyboi 5V booster will allow you to extend your VTX voltage range on the 1S versions.
Extend flight time and improve the reliability of your video with this voltage booster.
Specifications
Module Properties: non-isolated step-up module (BOOST)
Input voltage: 1.8-5V
Output voltag..
8.11€
Brez DDV:8.11€
Model: PF000971
Don"t forget to use a capacitor to protect your electronic system and get better video quality!
..
0.74€
Brez DDV:0.74€
Blagovna znamka: Mauch Electronic
Model: MAU2-082
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
22.05€
Brez DDV:22.05€
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
12.21€
Brez DDV:12.21€
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
30.25€
Brez DDV:30.25€
Blagovna znamka: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
77.79€
Brez DDV:77.79€
Model: rpmax-bec
A versatile device that converts a high input voltage from say a flight battery into a selectable (3 setting), stable output voltage and a maximum of 5A current. Useful for all types of model but particularly multi-rotors. Whether it powers the reciever, lights or other auxilliaries the choice is yo..
25.33€
Brez DDV:25.33€
Model: ESR-680UF-35V
The most powerful, lowest internal resistance capacitor on the market.
20mmx12.5mm (diameter)!
680uF, 35V. Solder at each ESC or simply solder to your PDB to fight voltage spikes...
1.56€
Brez DDV:1.56€
Blagovna znamka: Flywoo
Model: CAP03
Here are the Flywoo UNICON capacitors in pre-soldered version in 35V, 220UF.
Specifications
Dimension : 8 x 12mm
Capacitor Cap are ..
13.03€
Brez DDV:13.03€
Model: XT60+CAP
The perfect combo to mount on your drone for input filtering of the voltage of your LiPo battery.
Includes
1 x XT60-CAP PCB
1 x XT60 (Amass)
1 x capacitor 2200UF / 35V
1 x 14AWG 100MM bla..
4.84€
Brez DDV:4.84€
Model: STICKER-CONDO-18
Set of 2 special stickers for Panasonic Low ESR 1000uF 35V Capacitors...
2.38€
Brez DDV:2.38€
Model: STICKER-CONDO-17
Set of 2 special stickers for Panasonic Low ESR 1000uF 35V Capacitors...
2.38€
Brez DDV:2.38€