%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: Mauch Electronic
Model: MAU2-082
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
22.05€
Brez DDV:22.05€
Model: UP-616
Ultra Power UP616 is a new special charger, compared with traditional charger, it has a External Discharge Function, so it means you can share a external discharge experience via Ultra Power Discharger UP-D200 to this charger. For the charger itself, you can enjoy a Max power 400W, 16A fast charging..
65.49€
Brez DDV:65.49€
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
12.21€
Brez DDV:12.21€
Model: UP-2400-6S
The most Powerfull and advanced Charger on the Market - 2400 W
Ultra Power UP2400-6S 4X600W 25A Four Channels UAV Drone Charger
SpecificationInput voltage: AC 220V Charge power: 2400W (4x600W)Charge current range: 5A/10A/15A/20A/25A Battery type: LiPo/LiHVBattery cell count: 6SWorking mode: Stor..
595.00€
Brez DDV:595.00€
Model: UP-1200+
The most Advanced Charger on the MarketUltra Power UP1200+ 25A UAV/Agricultural Drone Fast Balance Charger/Discharger With Display Screen For 8 Channel 2-6S LiPo LiHV Battery
UP1200+ have a color display screen to clearly show the charging status, the user can well know the charging data, like char..
439.26€
Brez DDV:439.26€
Model: usbcharger
USB Charger Pro - Lipo 2-6s - You must have it, a phone, tablet, ... charger with all information, as voltage, current, charged mAh, ... Specifications - Input voltage range : 7~26v (2s-6s : 1600~5000mAh) - Output current : 0 - 2.6A - Voltage precision : +/- 0.3% , Resolution : 0.01V - Current pre..
34.34€
Brez DDV:34.34€
Model: BALANCER-XH-KIT-DIY
Practical and complete, this kit of cables and connectors will allow you to repair your lipo balancing plugs.
This kit contains 10 XH plugs for each type of lipo (6S/5S/4S/3S/2S).
The red and black cables supplied are already pre-crimped to facilitate the creation of your "custom" balancing socket,..
17.95€
Brez DDV:17.95€
Model: CHARGE-PLATE-XT30/XT60
2S-6S RC Lipo Parallel Balance Charge Plate XT30 and XT60 Plug
Specifications
Supports XT60 or XT30 2-6S Lipo.
High-quality gold-plated connectors.Supports up to four packs of the same ..
13.03€
Brez DDV:13.03€
Blagovna znamka: iFlight
Model: X009865
XING-E series Iflight motors are very powerful and have some qualities such as strength and durability.
Bullet points
High-strength ..
16.31€
Brez DDV:16.31€
Blagovna znamka: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
26.15€
Brez DDV:26.15€
Blagovna znamka: Mauch Electronic
Model: MAU2-016
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
55.66€
Brez DDV:55.66€
Prišli ste do konca seznama.