![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Ni na zalogi
Blagovna znamka: ProfiCNC/HEX
Model: HX-IR-SEN
Tutorial for Precision Landing with the Cube: https://irlock.readme.io/docs Send technical/support questions to info@irlock.com Enhance your UAV fleet with Precision Landing and target recognition features. Attach the
IR-LOCK Sensor to your UAV, and place the MarkOne Beacon where you want to land. G..
118.77€
Brez DDV:118.77€
Ni na zalogi
Blagovna znamka: ProfiCNC/HEX
Model: HX-CBLU-H7
Profi CNC/HEX Blue Cube H7 is made in the USA in an ITAR certified Factory in Fremond, CA. This edition is aimed at military and government.
Product DescriptionThe cube can be used with a range of carrier boards such as the Standard, mini or Kore.
2x CAN (pins reserved for a 3rd Can bus)2x I2C5..
491.72€
Brez DDV:491.72€
Blagovna znamka: ProfiCNC/HEX
Model: HX-CORE
FEATURES AT-A-GLANCEUp to 12-cell Lithium battery (50.4V)140A continuous current with 280A surgesPower and signal for ESCs conveniently located in corners12V navigation light power available at each cornerBuilt-in power distributionBuilt-in voltage and current senseRedundant power supplies for fligh..
286.80€
Brez DDV:286.80€
Blagovna znamka: ProfiCNC/HEX
Model: HX-MCB
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller size and almost the same capability with Pixhawk 2.1 standard carrier board, it can better fit-in to those applications which have size limits. Also, it..
90.08€
Brez DDV:90.08€
Blagovna znamka: ProfiCNC/HEX
Model: HX-PIX-CAB
Product Description
Specification:
ProfiCNC/HEX PH 2.1 Cable Set
 Includes:
1 x Spare cable set..
25.33€
Brez DDV:25.33€
Ni na zalogi
Blagovna znamka: ProfiCNC/HEX
Model: HX-PIX-PBM
Product Description
Specification:
up to 8s 30A continuous
XT60 connectors
 Includes:
1 x Power Brick Mini(No wires, Power 2 cable is included with pixhawk 2.1 or you can buy extra cable packs here)..
28.61€
Brez DDV:28.61€
Blagovna znamka: ProfiCNC/HEX
Model: HX-CUB-ID-CAN
ProfiCNC/HEX Cube ID_CAN
Tiny and low power consumption enable ultra-lightweight drones application.
Enable information broadcasting (e.g. identification number, type of aircraft, etc.)
Design in compliance with “UAS Remote Identification”
FCC/CE certified..
77.79€
Brez DDV:77.79€
Ni na zalogi
Blagovna znamka: ProfiCNC/HEX
Model: HX-CUB-ID
Tiny and low power consumption enable ultra-lightweight drones application.
Enable information broadcasting (e.g. identification number, type of aircraft, etc.)
Design in compliance with “UAS Remote Identification”
FCC/CE certified..
40.90€
Brez DDV:40.90€
Ni na zalogi
Blagovna znamka: ProfiCNC/HEX
Model: OD-HERE-CAB2
ProfiCNC/HEX Here GPS2 port cable for second GPS...
4.02€
Brez DDV:4.02€
Blagovna znamka: ProfiCNC/HEX
Model: HX-SCREW
Pack of 10 screws for mountig the Cube...
2.38€
Brez DDV:2.38€
Blagovna znamka: ProfiCNC/HEX
Model: HX-CBL-P
Prifu CNC/HEX Cube Mini – No Carrier Board included
INSIDE THE CUBE
An STM32F427 Rev 3 Flight management unit. (where the flight controller lives.)An STM32F100 I/O processor with pass through capabilities for failsafe. (deals with the Receiver and outputs )
IMU"s1 Fixed 10 Axis IMU on the main Main..
147.46€
Brez DDV:147.46€