Mauch Electronic

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-060

Mauch Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm

Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector. REM: This cable is standard delivery with any Power-Cube !..

5.66€

Brez DDV:5.66€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-062

Mauch Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm

Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm Power-Cube 5.3V output cable with 3x JR servo connectors. REM: This cable is standard delivery with Power-Cube 4 !..

5.66€

Brez DDV:5.66€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-063

Mauch Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm

Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm Power-Cube 12.0V output cable with 3x JR servo connectors. REM: This cable is standard delivery with Power-Cube 3 and 4 !..

5.66€

Brez DDV:5.66€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-072

Mauch Standard Line 50A 4-14S Sensor (HS-050-HV)

50A - Current measurement sensor board, based on Allegro Hall Sensor ACS-50U. The voltage reading of the LiPo is optimised for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. The BEC will also power th..

45.00€

Brez DDV:45.00€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-059

Mauch PC - Series "V3" / Power-Switch

This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control. It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off. The switch has already an installed 3D print..

20.41€

Brez DDV:20.41€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-050

Mauch Backup power cable for Pixhawk 2.1

This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1. Molex CLIK-Mate 2.0mm 6p / L = 150mm..

4.84€

Brez DDV:4.84€

V košarico

Dodaj na seznam želja Primerjaj ta izdelek

Kupite Vprašajte

Hitri pregled

Blagovna znamka: Mauch Electronic Model: MAU2-089

Mauch Standard Line Customized cable from Sensor Hub X2 to HS-xxx-xx Sensor Board

Mauch Standard Line Customized cable from Sensor Hub X2 to HS-xxx-xx Sensor Board The cable is made of AWG28 silicone wires with original Hirose DF13 connectors. The total cable length should not exceed 290mm. The cables are "hand made" and electrical tested. If no requested cable length is provided..

4.02€

Brez DDV:4.02€