![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Plačilo na obroke prek Lean Pay: enostaven, 100-odstotno digitalen, najhitrejši način za nakup želenega izdelka 
RadioMaster"s Ranger is the pinnacle of TX ExpressLRS 2.4G modules.
Designed to last thanks to its robust CNC aluminum housing while looking good.
The Ranger is available in three formats, standard size, micro or nano; which provides wide compatibility with most radios on the market.
This combo version includes the module of your choice with two RP1 ELRS receivers and one RP2 ELRS receiver.
- The nano format adapts to radios with an external nano bay type such as the RadioMaster Zorro, the FrSky X-Lite, X9 Lite...
- The micro format adapts to radios with an external JR / micro type bay such as the RadioMaster TX16S MKII, the FrSky X9D, QX7...
- The standard format adapts to radios with an external nano OR micro bay thanks to its adapter boxes.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
The characteristics of each of the modules are partly common, for the additional characteristics of the standard Ranger, refer to the "standard version" columns :
Bullet points
- High-efficiency cooling system
- Up to 1Watt Power output
- Wifi and Bluetooth support
- Packet rates up to F-1000Hz
- T-antenna included
Standard version
- OLED Display
- Rugged CNC Case
- Built-in Accelerometer
- 5 Direction Nav key and customizable shortcut buttons
- Micro and Nano adapters included
- Moxon included
- CRSF cable for compatible Futaba radios included
Specifications
- Regulatory Domain: ISM2400
- MCU: ESP32(main), ESP8285(aux,as espbackpack)
- RF chip: SX1281IMLTRT
- Frequency Range: 2400 MHz to 2480 MHz
- Maximum packet rate: 500Hz/F1000Hz (F1000 mode requires EdgeTX 2.7.1 or later)
- Minimum receiver refresh rate: 25Hz
- RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
- Wifi Support: Yes
- Bluetooth support: Yes
- XT30 Power supply voltage: DC 6V - 16.8V
- Weight: 50g (with antenna) / 40.5g (without antenna)
- Dimension: 136*49*33mm (with T antenna) / 74*49*33mm (without antenna)
Standard version
- Module bay adapters: JR standard 5pin socket & Nano standard 8pin socket
- Futaba CRSF socket cable: Included
- OLED screen: 64x128px
- 3-Axis Accelerometer: Yes (STK8BA58 MEMS Accelerometer)
- Built-in RGB light strip
- Weight: 138g (with Moxon antenna) / 135g (with T antenna) / 126g (without antenna)
- Dimension: 95*51*25mm (without antenna)
Included
- 1x Ranger module (micro or nano or standard)
- 2x RP1 ELRS receiver
- 1x RP2 ELRS receiver
- 1x T antenna
- 1x Futaba CRSF socket cable (standard version only)
- 1x JR Adapter (standard version only)
- 1x Nano Adapter (standard version only)
- 1x Moxon Antenna (standard version only)
- 1x Hexagon socket screwdriver (standard version only)
- 3x M2*5 Screws (standard version only)