TBS Core PNP25
The TBS CORE PNP25 is a consequent progression to the TBS CORE, tailor made for lightweight FPV aircraft such as the TBS CAiPiRINHA. The main advantage over the standard CORE is the connectors and supplied cables. No more soldering required to install this puppy. It supplies a (selectable) 5V or 12V to video transmitter and fpv camera regardless of input voltage (2S to 10S). The TBS CORE PNP25 can supply video transmitters with up to 1W of emitted power (EIRP) and a standard FPV camera - or charge a GoPro camera.
The included OSD provides real-time info on battery status, flight time and RSSI. If your setup is sporting an EzUHF 8ch receiver (diversity or lite), the digital RSSI info can be displayed using the separate EzUHF link cable. The onboard microphone transmits the on-board sounds down your video transmitter.
By including a 25A current sensor into a tiny form factor it is an ideal companion for your small FPV aircraft. The current sensor can be calibrated from the OSD, but comes pre-calibrated out of the box. All connectors are now plug & play, requiring no soldeirng whatsoever to get the product running.
In a nutshell, the TBS CORE PNP25 makes FPV setups super-easy and is a safety feature every small FPV plane should have. No more cutouts due to low voltage, single battery FPV systems prevent you from forgetting to charge spare batteries, the simplified wiring reduces points of failure.
Installation is fool proof: Plug your battery into the JST / BEC connector and power all your plane"s electronics from the other JST / BEC connector. The current sensor automatically measures the current passing through this cable. Plug in the VTx (5V default) and the camera (12V default).
Main product features
- Plastic enclosure and connector-sockets (Molex Picoblade) for all ports
- 2x 2S - 10S input (OSD measures up to 6S)
- Constant 5V @ max. 2A, 12V @ max. 600mA (individually, not in combination!)
- 42x27mm, 12g
- Switching power with >85% efficiency
- OSD with integrated current sensor, RSSI and battery voltage display
- EzUHF digital link support
- Onboard microphone included
- Output power limitation protects your equipment in case of reverse polarity
- Extremely low ripple and low RF noise, two stage filtered and shielded.
Since this is a switching regulator it does not need to be ventilated or exposed and can be buried in your plane for maximum durability.
Customization options
The cables required for connecting the CORE PNP25 to your camera and video transmitter are included in the camera and video transmitter. In case you are just buying the TBS CORE PNP25 you may choose to add these cables.
The EzUHF Link cable is required to connect your EzUHF 8ch Lite or EzUHF 8ch Diversity receiver to the TBS CORE PNP25. The 4ch EzUHF receiver does not provide the link port!
For powering 5V cameras (e.g. GoPro Hero) or 12V transmitters, open the TBS CORE PNP25"s rear 4 screws and change the solder jumpers at the bottom of the internal board. The solder jumpers are conveniently labelled.
If you"d like to pass external telemetry or audio from an external microphone, you can set the solder jumper for this at the bottom of the internal board as well. The audio in is the white cable on the CAM port.
Poiščite izdelek, ki ga želite, in ga dodajte v košarico. Odprlo se vam bo okence, ki vam ponudi dve možnosti – da nakupujete naprej ali zaključite nakup. Izberite tisto, kar vam ustreza.
Ko boste izbrali vse, kar potrebujete, natančno preglejte košarico, nato pa kliknite na gumb »nadaljuj na vnos podatkov«. Izberite med opcijami: fizična ali pravna oseba. Najprej boste morali vnesti podatke, glede na to, ali ste fizična oseba ali podjetje. V primeru, da naročate oz kupujete kot pravna oseba, torej podjetje registrirano v Sloveniji kot tudi EU, velja da vnesete sledeče:
- Naziv podjetja
- Točen naslov podjetja
- Davčna številka
- Obvezna telefonska številka (dostavna služba)
Izberite način plačila:
- Po povzetju
- TRR
- Paypal
- Leanpay
Čisto na koncu pozorno preberite podatke o vašem naročilu in potrdite svojo izbiro.
V roku 1-3 delovnih dni bo paket prispel na vaš naslov.
Izdelke dostavlja dostavna služba GLS. Ob dostavi vas bo poklical dostavljavec dostavne službe GLS in se z vami dogovoril za prevzem paketa. Paket bo dostavljen na naslov, ki ste ga navedli ob naročilu.
Izbirate lahko med tremi načini plačila:
- Preko spletne banke oz. po predračunu
- PayPal*
- Plačilo po povzetju
- Lean pay
Če je vrednost paketa manjša od 50€, dostava po Sloveniji preko dostavne službe znaša 5,90€. Pri nakupu nad 50€ je dostava po Sloveniji brezplačna.
Znesek dostave se obračuna pri zaključku nakupa.
Žal se popusti in ugodnosti v naši spletni trgovini ne seštevajo. Ob naročilu lahko uporabite le eno kodo za ugodnost.
Če želite opraviti postopek vračila, vas vljudno prosimo, da izpolnete obrazec tukaj.
Če v 15 dneh od nakupa stranka ugotovi, da izdelka ne želi iz kakršnega koli razloga, izdelek prinese do nas v original embalaži, nepoškodovanega, NEAKTIVIRANEGA z računom. V takšnem primeru stranki vrnemo kupnino.
Če v roku 15 dni od nakupa stranka ugotovi, da je z izdelkom (dronom) karkoli narobe, izdelek prinesete do nas oz. vrnete v originalni emabalaži z vso vsebino, ki je bila v njej. V takšnem primeru stranki dron zamenjamo z novim. Vračilo izdelka je možno v originalni embalaži, nepoškodovano, z računom.
Po pretečenih 15 dneh steče garancijski postopek. Izdelek pošljemo na DJI pooblaščeni uradni servis. V roku 7-10 delovnih dneh prejmemo zamenjan izdelek.
Garancija prične veljati od aktivacije drona in ne od nakupa le-tega. Za uveljavljanje garancije ne potrebujete računa.
Servis pri pooblaščenem serviserju za DJI drone traja od 7-10 delovnih dni. Ker ima DJI visoke standarde varnosti , drone menjajo za nove in jih ne popravljajo.
Da, lahko se oglasite v naši prodajalni, kjer vam bomo z veseljem pomagli in predstavili izdelek.
Za izposojo izdelkov prosim pojdite na našo spletno stran: rent.onedrone.com/store oziroma se oglasite v naši prodajalni.
Kontaktirajte nas in zagotavljamo vam, da boste prejeli vse potrebne informacije.
Pokličite nas na številko: 041 688 150
Ali pa nas kontaktirajte preko e-pošte: info@onedrone.si