Menu
Your Cart

FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone

FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
FETTec Infinity G4 MPU6000 45A 3-6S AIO By NewBeeDrone
116.31€
Ex Tax: 116.31€
  • Stock: In Stock in 3 days
  • Model: 02AC23
3399 views
Tags: fettec , infinity , g4 , mpu6000 , 45a , 3-6s , aio , by , newbeedrone

This AIO InfinityAIO FETTec G4 will guarantee reliability and protection for your drone and therefore flight with confidence in any environment.

In addition to its dust and moisture-proof design, the AIO also features FETtec.

It mounts in 30.5*30.5mm and consists of two CNC aluminum heat sinks.

The Infinity has been designed to excel in any flying condition, whether racing, freestyle or cinematic.

The AIO consists of an MPU6000 gyroscope, a DJI 6pin connector, a micro USB connector as well as multiple UART ports for versatile connectivity.

It supports 3-6S voltage and is capable of handling 45A continuous current.

Note : upon receipt of your item, please connect it via USB and calibrate the accelerometer before starting to solder.


Specifications

  • MCU : STM32G474 Running FETTec Alpha Firmware 0.7-62
  • Gyro : MPU6000
  • 4x STM32G071 @64MHz FETtec ESC MCU Running FETTec ESC Firmware 1.0-241
  • 6-Pin DJI FPV Air Unit Connector
  • Micro USB Connector
  • UART1 : DJI Connector
  • UART2 : Used for Receiver
  • UART3 : Free (also connect to Fettec Analog Onboard OSD)
  • UART4 : Free
  • UART5 : Used for ESCs / TLM / Onewire
  • OneWire BUS with up to 8kHz looptime (one cable for all Motor signals and Telemetry)
  • Continuous Current : 45A
  • Burst : 55A
  • Dshot 300-2400
  • 3-6S Battery Input
  • 12V 2A Design for DJI FPV Air Unit
  • 5V 3A Power supply for external LED or GPS module
  • Dimensions: 41x37x7.6mm with 30.5x30.5mm Mounting Holes
  • Weight: 19.4gr with grommets, 18.8gr without grommets
  • FETTEC OSD support for Analog build
  • Buzzer Ready
  • 4x LED

Included

  • 1x Infinity FETtec AIO Flight Controller + ESC
  • 1x DJI O3 Cable 100mm (Silicon wire)
  • 2x 16Pin Cable 150mm (Teflon wire)
  • 13x Nylon Lock Nut
  • 5x Steel Screw M3x14
  • 4x Grommets Short, 4x Grommets Long
  • 1x 470uf 35v Electrolytic Capacitor
  • 1x XT60 Cable

Note for analog build

  • Analog build will need to setup Serial 3 to talk to the internal Analog OSD Chips.
  • Please follow the setting below to enable the Analog OSD chips. 
  • Settings>FC Setup>Serial 
  • MSP Port1   - Serial3 
Voir plus

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.

When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:

  • Company name
  • The exact address of the company
  • tax number
  • Mandatory phone number (delivery service)

Choose a payment method:

  • In summary
  • TRR
  • Paypal
  • Leanpay

At the very end, carefully read the information about your order and confirm your choice.

The package will arrive at your address within 1-3 working days.

Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.

You can choose between three payment methods:

  • Via the online bank or according to the estimate
  • PayPal*
  • Cash on delivery
  • Lean pay

If the value of the package is less than €50, delivery within Slovenia via the delivery service is €5.90. For purchases over €50, delivery within Slovenia is free.

The delivery amount is calculated at the end of the purchase.

Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.

If you want to go through the return process, we kindly ask you to fill out the form here.

If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.

If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.

After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.

The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.

Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.

Yes, you can visit our store, where we will be happy to help you and present the product.

To rent products, please go to our website:rent.onedrone.com/storeor visit our store.

Contact us and we guarantee that you will receive all the necessary information.

Call us at the number:041 688 150

But contact us via e-mail:info@onedrone.si