































- Stock: In Stock in 3 days
- Model: SB-F4V4-55-STACK
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 55A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro.
The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good performance.
Always equipped with a Bluetooth controller allowing settings via the mobile application, the stack also has a TVS diode protecting the electronics.
Integrated LEDs indicate the battery charge level and 2 3A BECs provide a 5V and 9V power supply.
FC
- MCU : STM32F405
- IMU(Gyro) : ICM42688P
- USB Port Type : Type-C
- Barometer : Built-in
- OSD Chip : AT7456E chip
- BLE Bluetooth : Supported.
- WIFI : Not supported
- Compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit
- ESC Signal : M1 - M4 on bottom side and M5-M8 on front side.
- UART : 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6
- ESC Telemetry : UART R5(UART5)
- I2C Supported.
- Traditional Betaflight LED Pad : Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.
- Buzzer : BZ+ and BZ- pad used for 5V Buzzer
- Power Input : 3S - 6S Lipo
- RSSI Input : Supported.
- Smart Port / F.Port : Not supported
- Firmware Target Name : SPEEDYBEEF405V4
- Mounting : 30.5 x 30.5mm( 4mm hole diameter)
- Dimension : 41.6(L) x 39.4(W) x 7.8(H)mm
- Weight : 10.5g
ESC
- Firmware : BLHeli_S J-H-40
- Wireless Configuration : Full Configuration Supported in the SpeedyBee app
- Continuous Current : 55A * 4
- Burst Current : 70A(5seconds)
- TVS Protective diode : Yes
- External Capacitor : 1000uF Low ESR Capacitor(In the package)
- ESC Protocol : DSHOT300/600
- Power Input : 3-6S LiPo
- Power Output : VBAT
- Current Sensor : Support (Scale=386 Offset=0)
- ESC Telemetry : Not supported
- Mounting : 30.5 x 30.5mm( 4mm hole diameter)
- Dimension : 45.6(L) * 44(W) * 8mm(H)
- Weight : ~23.5g
Included
- 1x F405 V4 FC
- 1x BLS 50A 4in1 ESC
- 1x 35V 1000uF Capacitor
- 5x M3 nylon nut
- 5x M3 silicone o-ring
- 5x M3*8mm grommet
- 5x M3*8.1mm grommet
- 1x Sh 1.0mm 15mm 8pin cable
- 1x Sh 1.0mm 75mm 8pin cable
- 5x M3*30 screw
- 1x DJI 6pin cable
- 1x XT60 power cable (70mm)
Find the product you want and add it to your cart. A window will open, offering you two options - to continue shopping or to complete the purchase. Choose what suits you.
When you have selected everything you need, carefully examine the basket, then click on the "continue to enter information" button. Choose from the options: natural or legal person. First, you will need to enter information, depending on whether you are a natural person or a company. If you are ordering or buying as a legal entity, i.e. a company registered in Slovenia as well as the EU, you must enter the following:
- Company name
- The exact address of the company
- tax number
- Mandatory phone number (delivery service)
Choose a payment method:
- In summary
- TRR
- Paypal
- Leanpay
At the very end, carefully read the information about your order and confirm your choice.
The package will arrive at your address within 1-3 working days.
Products are delivered by the GLS delivery service. Upon delivery, the delivery man of the GLS delivery service will call you and arrange with you to pick up the package. The package will be delivered to the address you specified when ordering.
You can choose between three payment methods:
- Via the online bank or according to the estimate
- PayPal*
- Cash on delivery
- Lean pay
If the value of the package is less than €50, delivery within Slovenia via the delivery service is €5.90. For purchases over €50, delivery within Slovenia is free.
The delivery amount is calculated at the end of the purchase.
Unfortunately, discounts and benefits in our online store do not add up. You can only use one discount code per order.
If you want to go through the return process, we kindly ask you to fill out the form here.
If, within 15 days of purchase, the customer finds that he does not want the product for any reason, he must bring the product to us in its original packaging, undamaged, UNACTIVATED with the invoice. In such a case, we return the purchase price to the customer.
If within 15 days of purchase the customer finds that there is something wrong with the product (drone), bring the product to us or you return it in the original packaging with all the contents that were in it. In such a case, we replace the customer's drone with a new one. The product can be returned in its original packaging, undamaged, with a receipt.
After 15 days, the warranty process expires. We send the product to a DJI authorized official service center. We receive the replaced product within 7-10 working days.
The warranty starts from the activation of the drone and not from the purchase of it. You do not need an account to claim the warranty.
Service at an authorized DJI drone service center takes 7-10 working days. Because DJI has high safety standards, they exchange drones for new ones and do not repair them.
Yes, you can visit our store, where we will be happy to help you and present the product.
To rent products, please go to our website:rent.onedrone.com/storeor visit our store.
Contact us and we guarantee that you will receive all the necessary information.
Call us at the number:041 688 150
But contact us via e-mail:info@onedrone.si