![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: verteilerouadr
This is a power distribution printed circuit board for 4 BL-Ctrls to build a Quadro XL. The use reduces the wiring effort in building significantly. The 4 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the Fli..
34.90€
Ex Tax:28.61€
Model: verteileroktox
This is a Okto XL power distribution printed circuit board for 8 BL-Ctrls. The use reduces the wiring effort in building a OktoKopters significantly.The 8 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus.You can assemble optional cooling plates. (included in..
38.90€
Ex Tax:31.89€
Model: quadro2xlc
4 ESCs on two boards! Extremely fast brushless controllers version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! The board is tested and programmed (including bootloader) Note: The BL-Ctrl 3.0 controller is specifically..
329.90€
Ex Tax:270.41€
Model: oktoxlc
8 ESCs on one board! Extremely fast brushless controller version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! The board is tested and programmed (including bootloader) Note: The BL-Ctrl 3.0 controller is specifically d..
475.90€
Ex Tax:390.08€
Model: FF-MXL-D
XL Dovetail allows users to attach XL Camera Plate to the gimbal. XL Dovetail bolts to the MōVI XL, and the XL camera plate attaches to it. XL dovetail features an ARRI compatible dovetail so users can seamlessly move camera from MoVI XL to other ARRI dovetail based setups. The dovetail was optimiz..
475.90€
Ex Tax:390.08€
Model: FF-RED-RCP
This cable allows users to gain access to RED’s Redlink Command Protocol via the ‘CTRL’ port on RED cameras. This allows users to control functions like ISO, Frame Rate, Color temp, and Focus and aperture on EF lenses all from up to 600+ feet away using the MÅVI Controller and MIMIC controller. T..
218.90€
Ex Tax:179.43€
Model: FF-LE-MO-CA
This lens cable features custom cable which is ultra thin and flexible for the most difficult camera installations where wire routing is challenging. It features a Molex Microfit connector on one end, and a LEMO 1B 7 Pin on the other end. With 3 of these cables users will be able to control 3 moto..
218.90€
Ex Tax:179.43€
Model: FF-RED-DT
This cable allows users to power their RED Epic/Weapon/Scarlet from the MÅVI Pro’s camera power port. The cable features a custom thin and flexible cable with high quality connectors. Users will enjoy the convenience of unlimited up-time with this setup by utilizing the battery hot-swap capabilit..
279.90€
Ex Tax:229.43€
Model: FF-ARRI
Power your ALEXA Mini via D-tap with a high-strand count, silicon-wrapped wire for maximum durability and flexibility.
Features
Connector A: LEMO 2B 8 Pin
Connector B: D-Tap
Custom high flex, lightweight cable
250mm (9.8in) cable length..
279.90€
Ex Tax:229.43€
Model: herkquadro
"Herkules III" is the latest generation of Control Electronic for Brushless Direct Current Motors (BLDC).The Design was significantly reworked. More Power, better self-protection and an updated firmware for perfect flight stability.
The speciality of Herkules is the integration of 4 identical very p..
475.90€
Ex Tax:390.08€
Model: herkulesxliong
This edition is with longer cables and differente connectors for top/bottom motors. Its for bigger multirotors (hammer, NEO) and easier to connect the motors.
"Herkules III" is the latest generation of Control Electronic for Brushless Direct Current Motors (BLDC).The Design was significantly reworke..
793.90€
Ex Tax:650.74€
You have reached the end of the list.