![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: SB-MARIO5-CF-JB-XH
Arm designed for the SpeedyBee Mario 5 XH frame.
Included
1x Arm
Voir plus..
6.90€
Ex Tax:5.66€
Model: 01130005_3
BetaFPV"s BT3.0 connectors are designed for 2S batteries.
3 metal pins help balance power when charging without additional balancing connector.
You are a 2S quad pilot, these lighter connectors than regular connectors are a more practical choice and the best option to lose a few more grams on your q..
9.90€
Ex Tax:8.11€
Model: IC-CB8
iCharger CB8-XH&EN Balance Charging Board for DX8/458 Duo
Description:- Item Name: charging board- Usage: for iCharger DX8 and 458 Duo- Max voltage: 8S
Package Inlcuded:2x Charging Board2x Balance Cable..
28.90€
Ex Tax:23.69€
Model: MT-ASPD-DLVR
Matek Digital Airspeed Sensor ASPD-DLVR
All sensors DLVR series is the best airspeed sensor ArduPilot currently support.
Specifications & Features• ArduPilot AP_Periph L431/F405/F303 CAN node• All sensors DLVR-L10D, Industrial temperature range• CAN & I2C Interface• Typical Platforms: Fixed-Wing, Qu..
129.90€
Ex Tax:106.48€
Brand: Mauch Electronic
Model: MAU2-086
The cable is made of AWG28 silicone wires with original Hirose DF13 and MOLEX / Clik-Mate 2.0mm connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided, then we will deliver the standard length of 200mm ..
8.90€
Ex Tax:7.30€
Brand: Gremsy
Model: GR-MIO-PCC-FD
The cable is designed to supply 12V power and transmit the Mavlink signal from Pixhawk controller to Flir Duo Pro R through Mio Gimbal..
41.90€
Ex Tax:34.34€
Brand: Gremsy
Model: GR-MIO-PCC-FV
The cable is designed to supply 12V power and transmit the control signal from the controller to Flir Vue Pro R through Mio Gimbal.
Support only for the Flir Vue Pro R using with Flir Power & HDMI module...
41.90€
Ex Tax:34.34€
Hot
Brand: ProfiCNC/HEX
Model: HX-IR-CAB
Connect your IR-LOCK Sensor to the Cube autopilot. This cable provides I2C communication from IR-LOCK to the Cube via the Carrier Board, and also powers the IR-
LOCK Sensor. Length: 28cm See Documentation for connection instructions...
9.90€
Ex Tax:8.11€
Brand: Gremsy
Model: GR-P-CL
To connect from port on the PIXY F to TELEMETRY1/2 port on PIXHAWK 2.
Specs:
Cable length: 30cm..
27.90€
Ex Tax:22.87€
Brand: Gremsy
Model: GR-T3-P2
Gremsy T1/T3 - Canlink Cable for Pixhawk 2
To connect from COM2 port on the T1 to TELEMETRY1/2 port on PIXHAWK 2.
Lenght: 30cm..
16.90€
Ex Tax:13.85€
Model: RFD-P-2
Power supply for RFD Series 868, 900, 868x, 900x for Pixhawk 2
If you connect direclty RFD it can burn/spike your Pixhawk cause RFD can draw to much mAmps, so you need to connect it through BEC.
This is 4-6S version plug and play, but we can make it 12S too...
43.90€
Ex Tax:35.98€
Brand: Matek
Model: RTS-ASkit-Pix
The Matek Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear silicon tubing (40cm) to help monitor your wing"s airspeed !
Specifications• Board Supply voltage: 4~5.5V DC• Sensor: MS4525DO• Working current: 5mA• Output: I2C..
64.90€
Ex Tax:53.20€