![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: AXIS-SYNCFPV-2207-1860
New 2207.5 motor in 1860KV born from the collaboration between AxisFlying and the pilot SyncFPV.
Ideal for freestyle in bandos, this motor with flashing colors will go perfectly with the BlackBird 4943.5 propellers.
Specifications
KV: 1860
Internal resistance: 58.13mΩ
Shaft diameter: 5mm
Confi..
21.90€
Brez DDV:17.95€
Model: AXIS-SYNCFPV-2207-1960
New 2207.5 motor in 1960KV born from the collaboration between AxisFlying and the pilot SyncFPV.
Ideal for freestyle in bandos, this motor with flashing colors will go perfectly with the BlackBird 4943.5 propellers.
Specifications
KV: 1960
Internal resistance: 58.08mΩ
Shaft diameter: 5mm
Confi..
21.90€
Brez DDV:17.95€
Model: NMB-BEARING-NT
This set of 10 NMB 9x4x4 bearings will allow you to replace those that are too worn in your motors starting to squeak a little too much over crashes with humidity.
Compatible with a large majority of 5" motors, remember to measure your current bearings using a caliper to be sure of the correct sizin..
20.90€
Brez DDV:17.13€
Model: HARDLINE-2208-1700-UNIT
New series of Hard Line motors from Xnova with this 2208 intended for freestyle and cinematic.
Fully tested and precisely balanced, the motor is simple to tune, is efficient and has a new design with a fully aluminum-encased rotor.
Specifications
KV : 1700
No-Load current (@10V) : 1.3A
Weight ..
36.90€
Brez DDV:30.25€
Model: TMOTOR-V50A-ESC-4EN1-SE
The Velox 50A SE 4in1 ESC from T-Motor will guarantee you the performance you are looking for, whether in freestyle, cinematic or long range.
The Velox V50A 32Bit supports 3-6S voltage and measuring 30.5*30.5mm is perfectly suitable for Velox V3 motors.
Specifications
Current : 50A
Peak current..
77.90€
Brez DDV:63.85€
Model: AXIS-C246-1850KV-MR30
"Fly to create" is the slogan representing the association of AxisFlying with the Escape FPV pilot through these new motors dedicated to cinematic flight, the C246.
Here is the 1850KV version with MR30 connectors, intended for the Argus Plug & Play stack (related accessorie), the stack requiring NO ..
26.90€
Brez DDV:22.05€
Model: SB-BLS-55A
The SpeedyBee BLHeli_S 55A 4in1 ESC mounts in 30.5x30.5mm, has a TVS protection diode and supports DSHOT300/600, a voltage of 3-6S and has BLHeli_S J-H-40 firmware.
Specifications
Firmware : BLHeli_S J-H-40
Wireless Configuration : Full Configuration Supported in the SpeedyBee app
Continuous C..
53.90€
Brez DDV:44.18€
Model: SB-F405-V4
The SpeedyBee F405 V4 flight controller mounts in 30.5x30.5mm, configures via Bluetooth and is compatible with the DJI O3 / Runcam Link / Caddx Vista and DJi air unit VTX.
The FC is equipped with an ICM42688P gyro, a USB Type-C port, a barometer and an ATZ456E OSD.
Specifications
MCU : STM32F4..
48.90€
Brez DDV:40.08€
Model: SB-F4V4-55-STACK
The fourth version of the SpeedyBee stack includes an FC F405 and a BLHeli_S 55A ESC. The 30x30mm stack can support up to eight motors, is configured via Bluetooth, has a bult-in barometer as well as an ICM42688P gyro.
The SpeedyBee F405 V4 stack is both complete and inexpensive, all with good perfo..
79.90€
Brez DDV:65.49€
Model: ARGUS-STACK-55A-PLUG&PLAY
Are you looking for quality and time savings? AxisFlying took care of the welding and offers you this plug & play stack, requiring NO WELDING!
In fact, the cables with the MR30 connectors intended to connect the motors are already soldered to the FC.
All you have to do is mount the ESC and connect t..
167.90€
Brez DDV:137.62€
Model: SB-F4MINI-STACK
New mini stack from SpeedyBee, the F405 mini BLHeli_S 35A.
This stack includes a F405 mini 20x20 flight controller equipped with an 8Mb blackbox, an ICM42688P gyroscope, a barometer, an OSD and supports Bluetooth.
4in1 35A BLHeli_S mini V2 ESC has DSHOT 300/600 ESC protocol and supports 3-6S voltage..
74.90€
Brez DDV:61.39€
Model: GORILLA-30X30
This adapter allows the mounting of the Lucid 6S TBS stack on any 30x30mm frame.
Included
2x TBS Gorilla to 30x30 mounting adapter
4x M2x10 screw for stack mount
4x M3x6 screw for frame mount
Note : Stack not included
Voir plus..
5.90€
Brez DDV:4.84€