![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: PEGASUS-2207-BELL
Bell for Parallax Pegasus 2207 motors.
Included
1x Bell
Voir plus..
14.90€
Brez DDV:12.21€
Model: VALKYRIE-FRAME-MINI
The Valkyrie Mini is Parallax FPV"s 3.5" hybrid and convertible frame.
O3, HDZero, Walksnail, Vista and analog compatible, this frame allows you to go from a light and agile freestyle chassis to a versatile and robust Cinewhoop in a few minutes thanks to the Whoopkit.
The frame has the necessary spa..
53.90€
Brez DDV:44.18€
Model: VALKYRIE-FRAME-MINI-WHOOPKIT
The Valkyrie Mini is Parallax FPV"s 3.5" hybrid and convertible frame.
O3, HDZero, Walksnail, Vista and analog compatible, this frame allows you to go from a light and agile freestyle chassis to a versatile and robust Cinewhoop in a few minutes thanks to the Whoopkit.
The frame has the necessary spa..
116.90€
Brez DDV:95.82€
Model: FR1221
Here is the second version of the Caesar from Foxeer intended for the race.
This Caesar V2 can accommodate a nano camera, a 20*20mm VTX module and is made of Toray T700 carbon.
Note Only the frame is included
Specifications
Material: Toray T700 carbon with silky coating
Wheelbase: 195mm
Mounti..
64.90€
Brez DDV:53.20€
Model: CINEONC25-GUARDS
These guards for the CineON C25 frame allow it to withstand shocks and the wind...
10.90€
Brez DDV:8.93€
Model: 21678
X-Lock kit intended for QAV-S 2 JohnnyFPV SE frames from Lumenier.
Specifications
Compatibility : QAV-S 2 JohnnyFPV SE 5-7inch
Made in Collaboration with FPV expert JohnnyFPV
Durable custom aluminum arm locking system
Made of High-Quality Lumenier components
Allows for folding of arms for stor..
29.90€
Brez DDV:24.51€
Model: VALKYRIE-HARDWARE
Hardware set for the Valkyrie frame from Parallax.
Included
1x Hardware set
Voir plus..
8.90€
Brez DDV:7.30€
Model: APXDC-KEY-5-R0
Replacement CF ARM KEY for the ApexDC frame by ImpulseRC.
Voir plus..
4.90€
Brez DDV:4.02€
Model: X-FW080012-E1D1-01
This Flycolor single ESC has aluminum heat sinks, multiple protections (current, temperature etc...) and supports all Dshot and Proshot protocols.
Equipped with the ARM 32-bit Cortex MCU, the X Cross 80A supports frequency up to 64MHz, which is 25% higher than the previous generation MCU.
Specif..
86.90€
Brez DDV:71.23€
Model: VELOX-F7-SE-FC
The Velox F7 SE flight controller from T-Motor is mounted in 30.5*30.5mm, it is equipped with a dual BEC, a 128M blackbox and a barometer.
This HD and analog compatible FC can support 8 motors and wireless Bluetooth.
Specifications
MCU: STM32F722
Gyro: ICM-42688P
Flash: 128MB
OSD: AT7456E&HD
V..
76.90€
Brez DDV:63.03€
Model: BF15391
Supporting Betaflight, INAV and Ardupilot firmware, the Blitz F745 flight controller is equipped with quality components that significantly reduce noise!
The Iflight FC consists of, among other things, an ICM42688 gyro, a DPS310 barometer and a 32MB blackbox.
Specifications
MCU: STM32F745
Gyro:..
73.90€
Brez DDV:60.57€
BF15684/65899-large_default-blitz-f745-e55-30x30-stack-by-iflight-250x250.jpg "Blitz F745 E55 30x30 Stack By Iflight")
BF15684/65900-large_default-blitz-f745-e55-30x30-stack-by-iflight-250x250.jpg "Blitz F745 E55 30x30 Stack By Iflight")
Model: *(DISC)BF15684
Iflight BLITZ series stack with a Blitz F745 flight controller and a 4in1 E55 ESC.
Supporting Betaflight, INAV and Ardupilot firmware, this stack is equipped with a DJI HD plug&play connector requiring no soldering as well as quality components that significantly reduce noise!
The stack consists of..
154.90€
Brez DDV:126.97€