![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: B014898
Iflight"s Blitz Whoop 5.8G 2.5W VTX has many features such as a built-in microphone, 4 power levels up to 2500mW, 40 channels or self-checking of output power.
The CNC cooling case and a built-in fan add a double heat dissipation effect on this powerful analog VTX.
* Important note: French regulati..
76.90€
Ex Tax:63.03€
Model: WN01-FP004
With the VTX Avatar HD Moonlight, no need for your GoPro!
Indeed, you can enjoy recording up to 4K at 60 frames per second and a latency of 22ms.
The VTX Moonlight mounts in 20x20 or 25.5x25.5mm (M2).
Note: Camera not included
* Important note: French regulations impose a maximum power of 25mW in ..
178.90€
Ex Tax:146.64€
Model: 01010040_1
The Pavo20 Pocket from BetaFPV was designed for DJI users who are getting started in the world of FPV.
Very practical to transport, this Pavo20 is equipped with an auxiliary flight function with N/S/M and Turtlemode, perfect for beginners" learning.
Designed to carry a DJI O3 system (not included), ..
118.90€
Ex Tax:97.46€
Model: 0110003152
This Runcam Nano 6 analog camera with a 32Bit 400mW VTX are intended for the Tinyhawk III Plus from Emax.
* Important note: French regulations impose a maximum power of 25mW in the 5.8 Ghz frequency, as well as dual control piloting to practice immersion flight (FPV). The responsibility of Drone-FPV..
38.90€
Ex Tax:31.89€
Model: LILMATEY2-O3-VTX
This TPU mount allows you to hold a DJI O3 air unit on the back of the Piratframes Lil"Matey2 frame.
Specifications
Material : TPU
Easy to install
Weight : ~3.9g
Included
1x TPU mount
Note : Frame not included
Voir plus..
6.90€
Ex Tax:5.66€
Model: GP106339
GEPRC"s Cinebot25 is a DJI O3 (not included) compatible 2.5" model that has stable aerial shooting capability as well as unparalleled controllability.
This is the S (sport) version because the Cinewhoop is equipped with SPEEDX2 1505 motors.
An O3 anti-shake design is applied thanks to the dampers wh..
272.90€
Ex Tax:223.69€
Model: GP106338
GEPRC"s Cinebot25 is a DJI O3 (not included) compatible 2.5" model that has stable aerial shooting capability as well as unparalleled controllability.
This is the S (sport) version because the Cinewhoop is equipped with SPEEDX2 1505 motors.
An O3 anti-shake design is applied thanks to the dampers wh..
250.90€
Ex Tax:205.66€
Model: 1060008
This camera and VTX are intended for the Cetus Lite from BetaFPV.
With a light weight of 2.47g, this part allows 800TVL resolution and good image quality thanks to the 1/4" CMOS sensor.
Get wide, sublime shots with the 1.8mm lens and 150° FOV.
* Important note: French regulations impose a maximum po..
19.90€
Ex Tax:16.31€
Model: 01060009_2--1
The C04 nano camera is intended for BetaFPV"s Cetus X.
It is equipped with an antenna as well as the integrated VTX M04.
Note: Only compatible with Cetus FC version, check that your connector has 3 pins.
* Note importante : La réglementation française impose une puissance maximum de 25mW dans la f..
53.90€
Ex Tax:44.18€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Ex Tax:4.84€
Model: MATEY2-VTX-WALKSNAIL
This TPU mount allows you to hold a VTX Walksnail V2 on the back of the Piratframes Lil"Matey2 frame.
Specifications
Material : TPU
Easy to install
Weight : ~5.4g
Included
1x TPU mount
Note : Frame not included
Voir plus..
6.90€
Ex Tax:5.66€
Model: PUNCH-SHORTY-SLIDERALU
Aluminum VTX Slider for Punch and Shorty frames from PiratFrames.
- 1x VTX alu slider- 2x countersunk Torx M3x8mm screws - 1x countersunk M3 washer- 4x M1.6x8mm screws (Dji O3)..
9.90€
Ex Tax:8.11€