![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: dq2xl
8 ESCs on two boards (for Oktos) with heat sink! Extremely fast brushless controllers version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! The board is tested and programmed (including bootloader)
power
voltage : 10 ..
780.90€
Brez DDV:640.08€
Blagovna znamka: Mauch Electronic
Model: MAU2-052
Input voltage 3-20S, max. 85V !
Power-Cube 2 / V2 with 2 outputs 2x 5.3V / 10A.
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V.
Delivery time for..
240.90€
Brez DDV:197.46€
Blagovna znamka: Mauch Electronic
Model: MAU2-051
Input voltage 3-20S, max. 85V !
Power-Cube 1 / V2 with 1 output 5.3V / 10A.
Scope of delivery:
1x Power-Cube 1 with CFK enclosure and fan.
1x (040) PL sensor cable / L = 150mm
1X (060) Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6p / L = 200mm ..
169.90€
Brez DDV:139.26€
Blagovna znamka: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
24.90€
Brez DDV:20.41€
Model: alex35
..
85.90€
Brez DDV:70.41€
Model: quadrored
8 ESCs on two boards (for Oktos) with heat sink! Extremely fast brushless controllers version V3 for our MikroKopter. Version with second databus for redundance operation IMPORTANT: Use FlightCtrl Firmware V2.02 (or higher), otherwise read the instructions in the wiki ! The board is tested and prog..
841.90€
Brez DDV:690.08€
