![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: BetaFPV
Model: 01070006_1
This BetaFPV receiver based on ExpressLRS 2.4G project is the first True Diversity receiver which applies dual antennas.
The SuperD achieves an extremely accurate frequency rate and largely meets the reliability requirements for longrange flight.
*Power and distance are subject to specific regulati..
25.90€
Ex Tax:21.23€
/38387-large_default-bec-power-supply-adapter-cable-for-gocam-pm-g3-camera-250x250.jpg "BEC Power Supply Adapter Cable for GoCam PM G3 Camera")
/38388-large_default-bec-power-supply-adapter-cable-for-gocam-pm-g3-camera-250x250.jpg "BEC Power Supply Adapter Cable for GoCam PM G3 Camera")
Model: B0103852
Supply Cable for the Iflight GoCam PM G3 Camera
Specifications
Weight: 5.5g
Support: 4S-6S
Output: 5V/3A
Input Connector: XH2.54
Outpu..
9.90€
Ex Tax:8.11€
Top Brand
Brand: TBS
Model: TBS-FUSION-HARDWARE
Upgraded receiver module board for TBS Fusion.
Installation
Seperate the top and bottom board of your current Fusion module. (2 x 12pins connector)
Install the upgraded board to the top bo..
13.90€
Ex Tax:11.39€
Model: MAPX-MAINUP-2
Replacement Main upper CF 2mm for the Micro Apex frame by ImpulseRC.
Pressnuts not included..
5.90€
Ex Tax:4.84€
Model: hexartf
Hexa power board Plug and play RTF.
No more problems with soldering, bad contacts and IC2 problems.
- industrial soldered - preconfigured- tested- extra special cooling- DC converter 12V for powering video transmiter, ...- power cable for LIPO- added 3x low impendance elko 330/25- plug and play..
462.90€
Ex Tax:379.43€
Model: jdtu2
2.4GHz Jeti Duplex TU2 RF module for all RC transmitters This module is used universally for nearly all remote controls. It can be installed directly as replacement of the original RF module.Also it can be connected to a trainer connection Compatible systems are for example: Graupner/JR:X-347, X-388..
108.90€
Ex Tax:89.26€
Brand: Graupner
Model: graupwind
The windshield is designed for the mx and X-series of hand-held transmitters, with good ergonomics in mind. Both the transmitter and your hands are protected from adverse weather conditions such as cold wind, falling snow and light rain. Even when the external temperature is low and the wind icy..
24.90€
Ex Tax:20.41€
Brand: Graupner
Model: graupdel
For demanding competition pilots and glider flyers, who require a firm, securely located transmitter for extremely long and arduous flights. The de luxe cross-over strap is finely adjustable to match the pilot"s body size. Outstanding features of the de luxe cross-over strap include 40 mm wide w..
43.90€
Ex Tax:35.98€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Model: DJI-RO-LSM
The Len Support Mount secures your camera lens when mounted on the Ronin-M and further increases video stablility. Supports various types of lenses...
40.90€
Ex Tax:33.52€
Brand: DJI
Model: s1000reinfplat
S1000 (plus and premium version) upgrade carbon 3K plate from Kopterworx
• 2mm 3K carbon plate - more then 5 times stronger then DJI plate• No more yello or frame wobling• Adapter for video TX• Adapter for Receiver (Futaba, Graupner, Frsky) or for DJI A2 antennas - 90 degree
Easy to install, u need ..
249.90€
Ex Tax:204.84€