Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: scherrerplugst
Scherrer RC adapter Plugs to Tx
Futaba Square or Graupner connector cable (please write note which version do you need when ordering) for Plug-and-play connection to different types of radios...
54.90€
Brez DDV:45.00€
Blagovna znamka: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
7.90€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-013
The Sensor Hub X8 collects the current measurements from up to eight Power-Cube current sensors. The currents are summed up and passed to the Pixhawk flight controller via the Power-Cube power supply. The voltage measurement of the LiPo packs is measured separately by the Power-Cube.
An OLED display..
199.90€
Brez DDV:163.85€
Model: 7inchalmiauto
Description:7 Inch TFT LCD Screen FPV Monitor LT5802S 5.8G 40CH LED Backlight Multicopter with Build-in Battery Feature:1. Battery operation state OSD display: RSSI signal; index; channel indication.2. Automatic signal search.3. Support Chinese and English menus.4. Format: JPEG, AVI.5. Built-in dual..
121.90€
Brez DDV:99.92€
Model: FF-MXL-QR
MōVI XL quick release kit allows users to quickly mount / dismount the gimbal from a variety of platforms. The male portion of the quick release mounts to MōVI XL, and the female portion mounts to whatever platform you intend to mount MōVI XL to (Car, boat, Technocrane, Jib, Horse, Camel). The qui..
596.90€
Brez DDV:489.26€
Model: FF-MP-13
Use this accessory to mount two accessories equipped with 13mm plugs to a single 13mm mount point. Great for mounting a monitor and video receiver on the MōVI Controller, Pilot, MōVI Ring Pro, Adjustable Monitor Mount Quick Release, Low Profile Handle, etc.
Features:
Compatible with all Freefly ..
96.90€
Brez DDV:79.43€
Blagovna znamka: DJI
Model: DJI-IN2-GPSM
SERVICE PART: DJI Inspire 2 - GPS Modul (PART5)..
64.90€
Brez DDV:53.20€
Blagovna znamka: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Brez DDV:43.36€
Blagovna znamka: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Brez DDV:45.82€
Blagovna znamka: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Brez DDV:26.15€
Blagovna znamka: DJI
Model: DJI-RG-P6
DJI Goggles Racing Edition - OcuSync Pagoda Antenna SMA interface (Part 6)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via th..
10.90€
Brez DDV:8.93€
Blagovna znamka: DJI
Model: DJI-RG-P5
DJI Goggles Racing Edition - OcuSync Pagoda Antenna MMCX interface (Part 5)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via t..
10.90€
Brez DDV:8.93€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)