![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: 1060008
This camera and VTX are intended for the Cetus Lite from BetaFPV.
With a light weight of 2.47g, this part allows 800TVL resolution and good image quality thanks to the 1/4" CMOS sensor.
Get wide, sublime shots with the 1.8mm lens and 150° FOV.
* Important note: French regulations impose a maximum po..
19.90€
Brez DDV:16.31€
Model: 01060009_2--1
The C04 nano camera is intended for BetaFPV"s Cetus X.
It is equipped with an antenna as well as the integrated VTX M04.
Note: Only compatible with Cetus FC version, check that your connector has 3 pins.
* Note importante : La réglementation française impose une puissance maximum de 25mW dans la f..
53.90€
Brez DDV:44.18€
Model: 5A10084
The Moblite7 Walksnail has the AIO SuperX HD ELRS, 1002 20000KV motors and the VTX Avatar mini 1S.
The third version brings some improvements such as an ELRS V3.0 UART, the SuperX HD AIO, a GNB A30 connector and a built-in blackbox.
Specifications
Frame wheelbase: 75mm
Weight: 34.5 gram without..
272.90€
Brez DDV:223.69€
Model: 5A10085
The Moblite7 HDZero has EX1002 motors, the VTX Whoop Lite and HDZero"s nano lite camera.
The V3 has a GNB A30 plug, an AIO superX HD ELRS as well as an onboard blackbox.
Specifications
Frame wheelbase: 75mm
Weight: 31.5 gram without battery
Size: 98mm*98mm*50mm
Receiver : SPI ELRS 2.4G
Compatib..
272.90€
Brez DDV:223.69€
Model: 02AE03
Discover the pinnacle of racing innovation with the Cockroach 65mm LiteAF brushless frame from NewBeeDrone.
Precision engineered, the frame redefines the limits of speed and agility.
The carbon bottom has been removed to reduce weight but the design means this frame is just as durable as previous C..
6.90€
Brez DDV:5.66€
Model: 01130003_3
This set of 15 PEEK screws will allow you to reduce the weight of your whoop.
Stronger, stronger and more durable than nylon screws, these screws save up to 0.46g for construction using metal screws.
PEEK screws are therefore perfect for building 65/75mm whoops such as the Meteor.
Included
15x ..
8.90€
Brez DDV:7.30€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
62.90€
Brez DDV:51.56€
Model: POWER1000-BAG
Ideal for transporting, storing and protecting the DJI Power 1000.
The carrying bag has space for all the necessary cabling.
Equipped with air vents and zips, no need to take the DJI Power 100 out to use it!
Specifications
Dimensions: 452 x 240 x 232 mm (L x W x H)
Compatibility: DJI Power 10..
104.90€
Brez DDV:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
126.90€
Brez DDV:104.02€
Model: AR0056876
This adapter was designed by DJI to be able to connect the DJI Mic 2 to Sony cameras without using a 3.5mm TRS cable.
Its design allows it to be installed in the shoe of the Sony device where you can attach the DJI Mic 2 receiver.
As a result, the latter will be connected to the adapter interface an..
37.90€
Brez DDV:31.07€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Brez DDV:11.39€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Brez DDV:4.84€