![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: UV-TEXTIL-TAPE
This 5 meter roll of fabric adhesive has the particularity of being able to be cut by hand, thus making your work easier.
In addition to having a width of 15mm, this practical accessory is also fluorescent.
Specifications
Color : Pink, orange, blue, yellow, green or purple
Material : Fabric
Le..
3.90€
Brez DDV:3.20€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.90€
Brez DDV:4.02€
Model: VALKYRIE-MINI-TANTENNA-TPUBYDFR
Support for mounting an immortal T antenna on the rear of the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~0.8g
Included
1x TPU mount
Voir plus..
2.90€
Brez DDV:2.38€
Model: VALKYRIE-MINI-O3-TPUBYDFR
Support for mounting an O3 antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
3.90€
Brez DDV:3.20€
Model: DC1050/160C-6S
Dogcom 6S 1050mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
37.90€
Brez DDV:31.07€
Model: TR-PE-0001
This handy module from TuneRC is the perfect tool if you own GPS modules and want to add an external barometer/magnetometer to your builds.
You simply need your flight controller to have SCl/SDA pads to be able to use this module on your quads.
Specifications
Barometer: BMP280
Magnetometer: Q..
14.90€
Brez DDV:12.21€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
8.90€
Brez DDV:7.30€
Model: LIPO-PAD-DFR
Just as grippy as their predecessors, these 3 lipo pads are even thinner and lighter.
They allows you to keep the battery stationary while further reducing the overall weight of your drone.
Specifications
Dimensions : 100*50*1.5mm
Weight : ~8.4g (1pc)
Included
3x Lipo pad
Note : Battery ..
10.90€
Brez DDV:8.93€
Model: APEX-EVO-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna or Moonlight antenna on the ImpulseRC APEX EVO frames.
Specifications
Material : TPU
Compatibility : Apex EVO frames
Weight : ~1.4g
Included
1x TPU mount
Voir plus..
4.90€
Brez DDV:4.02€
Model: ANT-T-UFL-DFR
UFL 2.4GHz T antenna for ELRS receivers.
A small notch on the T allows a Rilsan cable to be passed through to better fix the antenna on the droine.
Available in two sizes, 50mm or 100mm.
Specifications
Connector : UFL
Size : 50mm or 100mm (optionnal)
Weight : 1.3g (50mm) / 1.6g (100mm)
Inclu..
4.90€
Brez DDV:4.02€
Model: R016384
The Mach R5 provides racing pilots with a high-quality FPV drone while allowing DIY customization.
The carbon plates and plastic components provide an improved internal structure layout, which simplifies maintenance while reducing the overall weight of the drone and thus providing better stability.
..
48.90€
Brez DDV:40.08€
Model: T015521
Bullet Points
Improved circuit design
High frequency stability
Outstanding performance
Long Range capabilities
Included
1x ELRS True Diversity receiver 2.4GHz
2x Antennas
Specifications
MCU: ESP32-Pico D4
Receiver Type: Gemini/True Diversity
Firmware: iFlight 2.4GHz 250mW Diversity RX(2.4..
38.90€
Brez DDV:31.89€