![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: SUPP-XT30-STANDOFF
This Mount allow you to fix your XT30 on a 5mm diameter standoff...
3.90€
Ex Tax:3.20€
Model: SUPP-XT60-STANDOFF
This Mount allow you to fix your XT60 on a 5mm diameter standoff...
3.90€
Ex Tax:3.20€
Model: ALU-STANDOFF-M25-20-BLK-PK
Standoff M2 Threaded Aluminium Hex 4.5mmx20mm
Set of 4...
5.90€
Ex Tax:4.84€
Model: M3X28MM-LC
Set of 4 M3x28mm standoffs in aluminum.
Included
4x Aluminum standoff
..
2.90€
Ex Tax:2.38€
Model: M3X25MM-LC
Set of 4 M3x25mm standoffs in aluminum.
Included
4x Aluminum standoff
..
2.90€
Ex Tax:2.38€
Model: 5A10023-KV19
Here is the Mobula6 2.4Ghz ExpressLRS version equipped with new 0802 motors.
Features
AIO Flight controller with ELRS Receiver and 5.8..
136.90€
Ex Tax:112.21€
Model: ppmi2ccboard
PPM / I2C Breakout Board Setfor standard servo connector and solder points for I2C..
19.90€
Ex Tax:16.31€
Model: ballhead
Material: aluminium 6061-T6 Only use for 25.00mm Tube Total weight: 50.0g..
75.90€
Ex Tax:62.21€
Brand: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€