![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: KW-SW-05
These are good quality twisted extension leads with a JR style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.
Specs:Connector Type: JR, 1 x male, 1 x femaleLength: 3..
1.90€
Ex Tax:1.56€
Model: KW-SW-04
Quality wire and connectors used on all Servo Lead Extensions. Comes with a hook to keep the plugs together. Great for larger planes with servos that experience high loads.
Specs:
Lead Length: 40cmmWire gauge: 22AWGWeight: 8gPlug type: JR
Delivery 1 piece..
1.90€
Ex Tax:1.56€
Model: GA-ML
Ultra light Micro Lipo 1S (4,2V) 600mA for powering R/C RX, parachute, servo, ...
Dimension: 40x22mm, weight few grams...
10.90€
Ex Tax:8.93€
Model: servoff
The most simple way to control Iris.
This bracket system allows you to adapt your existing EFC system to work with any lens by mounting the motor to this new bracket that can clamp to any 15/19mm matte box rods.
Large gear is compatible for all Cavision follow focus systems. With 44 teeth, the mod ..
133.90€
Ex Tax:109.75€
Model: tseradapt
The MKUSB is an interface to connect the MikroKopter with an Computer via the USB port. Its used for configuration, telemtry and firmware update of the MikroKopter. This version V3 is for the use with our new Flight-Ctrl V3.0. By placing a jumper, the target board can be supplied with 5V if neede..
10.90€
Ex Tax:8.93€
Model: mkservob
Adapter for connecting high-current servos to Flight-Ctrl V3.0. There are 2 RECOM-voltage regulators for a max. current of 2A on the circuit board installed.
delivery: 1 assembled board..
30.90€
Ex Tax:25.33€
Model: cf300pro
CF300 PRO 3 axis Gimbal.
On this gimbal fits almost every camera with extremly powerfull hispeed titanium servos with 40kg torque and antivibrations system.
Stabilization done with 2x picloc 3x. The weight of gimbal is under 2kg. Made of 2mm carboon and extremly strong, tested on more then 30 kg.
Un..
1,830.90€
Ex Tax:1,500.74€
Out of stock
Model: ppmi2ccboard
PPM / I2C Breakout Board Setfor standard servo connector and solder points for I2C..
19.90€
Ex Tax:16.31€
Model: ssp
Small servo pulley:
1 - 32T Pulley
1 - SH M3x6
1 - M3 Washer..
14.90€
Ex Tax:12.21€
Model: hbs690bb
Suitable for power models and gliders, helicopters, camera gimbals, boat models, and RC cars.
High-voltage, operating voltage up to 8.4V!
Direct operation with 2-cell LiPo battery packs
Operating voltage range 4.8 ... 8.4 V
Brushless
2 x ball bearings
Carbonite drive mechanism
High-Voltage Brushle..
69.90€
Ex Tax:57.30€
Model: servocabmtom
10cm Servo cable male to male. Perfect for connection between receiver and DJI.
Scope of delivery: 1 pieces...
0.90€
Ex Tax:0.74€