![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: MR1826
Foxeer offers you an 82A ESC, perfect for your powerful drones!
This Reaper V2 4in1 ESC equipped with a high quality F4 chip is capable of supporting a current peak of up to 145A.
With 30.5*30.5mm mounting, it supports BLHeli_32, DShot150/300/600/1200 MultiShot or OneShot firmware and 4-8S LiPo volt..
272.90€
Ex Tax:223.69€
Model: SKY-150759
The Skystars Uranus single ESC is a standalone ESC intended for freestyle drones and airplanes.
It supports 3-6S power supply and can handle current up to 35A.
Its BLHeli_32 firmware supports PWM frequency up to 128KHz, ensuring smooth motor operation even at high speeds.
Note : This ESC does not h..
15.90€
Ex Tax:13.03€
Model: SKY-150763
The Jupiter SL80 single ESC from Skystars has been designed to give your motors smooth power with great stability and durability.
The 32-bit G071 MCU and 12 low-ESR MosFets bring faster response speed as well as a smoother flight experience.
The Jupiter supports BLHeli_32 and 2-8S voltage.
Specif..
57.90€
Ex Tax:47.46€
Model: W4-FW060006-G1G1-TX1
Check out the Flycolor Trinx G5 60A 4-in-1 ESC with 60A of continuous current support, you will have plenty of headroom to push your rig to the limit.
With the high-powered MCU and Raptor 5 firmware, this is a path towards the next level for your builds!
Bullet Points
PWM frequency up to 128K..
90.90€
Ex Tax:74.51€
Model: JH61299
The Reactor 66 ESC supports 4-6S voltage and DSHOT300/600/1200.
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 66A × 4
Burst: 105A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_66
Soft : DSHOT300/600/1200
PWM : 24~128k
Mounting : 20x20mm, M2/M3
Included
1x..
67.90€
Ex Tax:55.66€
Model: JH61608
The Reactor 44 ESC supports 4-6S voltage and DSHOT300/600/1200/MAX2400 (FETTEC).
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 44A × 4
Burst: 54A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_44
Soft : DSHOT300/600/1200/MAX2400 (FETTEC)
PWM : 24~128k
Mounting :..
62.90€
Ex Tax:51.56€
Model: BF14874
FC Specifications
MCU: AT32F435CGU7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLI..
84.90€
Ex Tax:69.59€
Model: 3A30038
Dampers and screws for the Mobula6 frame from Happymodel.
Included
5x Screw
4x Damping ball
Voir plus..
2.90€
Ex Tax:2.38€
Model: SB-FDQ
Discharge your LiPo batteries with this SpeedyBee discharger.
It has an XT60 connector and has a discharge capacity of 60W for a voltage of 3-6S.
You will be able to control the voltage of each of your battery cells and view your parameters directly from the integrated screen.
If the settings are no..
20.90€
Ex Tax:17.13€
Model: S000199
Included
1x Set of 50 screws..
5.90€
Ex Tax:4.84€
Model: 3A10213-9
Set of dampers and screws for Mobula6 ECO 2024.
Included
4x Damper
4x M1.3*10 screw
Voir plus..
2.90€
Ex Tax:2.38€
Model: 3A10213-8
Set of dampers and screws for Mobula6 2024.
Included
4x Damper
4x M1.2*4 screw
Voir plus..
2.90€
Ex Tax:2.38€