%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: VCI-0702-29000KV
Discover Vulcan Innovation and its 0702 motors intended for micro whoops.
These 29000KV motors offer precise control and a very fast response time.
Their reduced body provides unparalleled agility, even in tight spaces.
The VCI Spark 0702 have a 1mm pressure shaft and will be perfect combined with 3..
31.89€
Brez DDV:31.89€
Model: F4-55A-FLYTOWER
The Aikon F4 55A stack consists of an F405 flight controller and a 55A ESC.
This 30x30mm stack supports 3-6S voltage, BLHeli-S firmware and has an OSD and a 16Mb SPI blackbox.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU : STM32..
77.79€
Brez DDV:77.79€
Model: UV-TEXTIL-TAPE
This 5 meter roll of fabric adhesive has the particularity of being able to be cut by hand, thus making your work easier.
In addition to having a width of 15mm, this practical accessory is also fluorescent.
Specifications
Color : Pink, orange, blue, yellow, green or purple
Material : Fabric
Le..
3.20€
Brez DDV:3.20€
Model: KUTR-O3CAM-TPUBYDFR
Support for installing a DJI O3 camera on the Lethal Conception Kut-R.
This 3D piece allows a camera angle between 40 and 60°.
Note: In order to use a VTX O3, it will be necessary to have a 20x20mm stack.
Specifications
Material : TPU
Compatibility : Kut-R
Weight : ~6g
Included
1x TPU mou..
8.93€
Brez DDV:8.93€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.02€
Brez DDV:4.02€
Model: VALKYRIE-MINI-TANTENNA-TPUBYDFR
Support for mounting an immortal T antenna on the rear of the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~0.8g
Included
1x TPU mount
Voir plus..
2.38€
Brez DDV:2.38€
Model: VALKYRIE-MINI-O3-TPUBYDFR
Support for mounting an O3 antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
3.20€
Brez DDV:3.20€
Model: VALKYRIE-MINI-GOPRO-TPUBYDFR
Support to install a GoPro on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~8.3g (with screw and nut)
Included
1x TPU mount
1x Screw
1x Nut
Voir plus..
4.84€
Brez DDV:4.84€
Model: RD15669
The Mach R5 provides racing pilots with a high-quality FPV drone while allowing DIY customization.
The carbon plates and plastic components provide an improved internal structure layout, which simplifies maintenance while reducing the overall weight of the drone and thus providing better stability.
..
320.41€
Brez DDV:320.41€
Model: VALKYRIE-MINI-O3-DJI-TPUBYDFR
Support for mounting an O3 camera or DJI FPV camera on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~2g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.20€
Brez DDV:3.20€
Model: DC1050/160C-6S
Dogcom 6S 1050mAh battery with 160C discharge rate.
Equipped with an XT60 connector, this battery with a long life cycle and lower internal resistance will provide you with reliability and stability.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, par..
31.07€
Brez DDV:31.07€
Model: TR-PE-0001
This handy module from TuneRC is the perfect tool if you own GPS modules and want to add an external barometer/magnetometer to your builds.
You simply need your flight controller to have SCl/SDA pads to be able to use this module on your quads.
Specifications
Barometer: BMP280
Magnetometer: Q..
12.21€
Brez DDV:12.21€