%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
18.90€
Ex Tax:15.49€
Model: 010-0154-00
The Castle Creations CC BEC 2.0 is the power solution for cinelifters video system.
The latter will give you higher voltage ranges.
This voltage regulator is perfect for powering servos, cameras and other power-hungry accessories.
The CC BEC 2.0 is the solution to protect your electronic components ..
61.90€
Ex Tax:50.74€
Model: CAIPI-2-ESC
Spare ESC with Caipirinha 2 PDB already soldered on.
Replacement PDB+ESC for Caipirinha 2 (Presoldered)
INCLUDES
HobbyWing SkyWalker 50A-UBEC 5V 5A
TBS Caipirinha 2 PDB
..
25.90€
Ex Tax:21.23€
Model: HM-SB
HiModel 6-50V Input 20A Large Current Switching Mode Voltage Regulator/ SBEC
HiModel 20A SBECInput: 6 - 50.4 VOutput voltage: 7.4V 8.4V 9V 12V OUTPUT (jumper selection)Current: 20amps continuous/ 25amps peak (2 seconds)Mode: Switch-modeQuiescent current: 60uA to 200uASize: 45 x 26 x 8mmWeight: 30g..
36.90€
Ex Tax:30.25€
![APD PowerBoard PDB360[X] 8S 34V 360A](https://www.onedrone.com/store/image/cache/catalog/produkti/APD-PD360/apd-pdb360-250x250.jpg "APD PowerBoard PDB360[X] 8S 34V 360A")
Brand: APD
Model: APD-PD360
The APD PDB360 is designed for high voltage and high current applications. It consists of 8 layers of heavy copper to sustain maximum current demand whilst dissipating minimal heat. This PDB can sustain up to 90A continuous to each ESC leg. Also features 12V 3Amp and 5V 1Amp regulators with a maximu..
47.90€
Ex Tax:39.26€
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
14.90€
Ex Tax:12.21€
Brand: Mauch Electronic
Model: MAU2-031
This new PC Series PDB includes two fully redundant BEC’s with POWER1 and POWER2 for the FC.
All in one PDB for Pixhawk 2.1 (The Cube) and any other flight controller via adapter cable. With integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC and most important an main power switch with an c..
619.90€
Ex Tax:508.11€
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
36.90€
Ex Tax:30.25€
Model: rpmax-bec
A versatile device that converts a high input voltage from say a flight battery into a selectable (3 setting), stable output voltage and a maximum of 5A current. Useful for all types of model but particularly multi-rotors. Whether it powers the reciever, lights or other auxilliaries the choice is yo..
30.90€
Ex Tax:25.33€
Model: herkIIIu7
Certified for motors U7/KW12 edition
"Herkules III" is the latest generation of Control Electronic for Brushless Direct Current Motors (BLDC).The Design was significantly reworked. More Power, better self-protection and an updated firmware for perfect flight stability.
The speciality of Herkules is ..
1,085.90€
Ex Tax:890.08€
Model: e1200640xesc
Tech Specs
Max Allowable Voltage: 26V Max Allowable Current (Persistent): 40A Signal Frequency: 30~450Hz Battery: 6S LiPo..
24.90€
Ex Tax:20.41€