![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: roninmthumb
Wireless Thumb Controller for Ronin-M - preorder
Simple to setup and use, the DJI Ronin Wireless Thumb Controller makes controlling your Ronin-M easier and more intuitive, even with only a single operator. Capture shots that are difficult or impossible now, and start using your gimbal to its full po..
189.90€
Ex Tax:155.66€
Model: roninbracket
Easy to use accessory clamp for the Ronin. Offers 1/4" and 3/8" thread mounting holes...
69.90€
Ex Tax:57.30€
Model: redronin
Used to connect the Ronin & Ronin-M Battery Power Distributor to a RED camera or another camera with the same connector port. The RED power cable is also compatible with the Ronin and Ronin-M gimbal and has a length of 50 cm...
100.90€
Ex Tax:82.70€
Model: NINJA-1M-IOS
Cable with a length of one meter type-C to iOS 90°.
Bullet points
Compatible with all USB Type-C powered hardware or cameras
Length :..
6.90€
Ex Tax:5.66€
Model: SWIFTFLYING-USBC-XT60-ADAPTER
This handy adapter switches your USB Type-C power to XT60, all while displaying the output voltage. This will allow you to test your drones without using your charged batteries.
Note: to change the output voltage (on the XT60 female side), all you need to do is:
- To press the button while pluggin..
10.90€
Ex Tax:8.93€
Model: SILICON-CAPS-MICRO-USB
Protect your micro USB outlets with these silicone caps from NinjaTech.
Sold in sets of 10.
Specifications
Matérial : Silicon
Color..
1.90€
Ex Tax:1.56€
Model: SILICON-CAPS-USBC
Protect your USB-C outlets with these silicone caps from NinjaTech.
Sold in sets of 10.
Specifications
Matérial : Silicon
Color : B..
1.90€
Ex Tax:1.56€
Model: GAINE-BATTERIE-6
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription..
7.90€
Ex Tax:6.48€
Model: GAINE-BATTERIE-7
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription..
7.90€
Ex Tax:6.48€
Model: GAINE-BATTERIE-8
This heat-shrink tube meter will allow you to protect your batteries.
Once the battery is placed inside the sheath, all you have to do is heat it with a hot air gun (not included) or heat gun (moderate temperature) to retract it.
Note: The sheath is uniform, thick, opaque and without any inscription..
7.90€
Ex Tax:6.48€
Model: AS150-NINJA
This AS150 male/female connector set is intended for large capacity batteries with anti-spark system (male and female connectors reversed on each polarity to avoid any short circuit).
Recommended wire sizes: 8/10AWG (not included).
..
13.90€
Ex Tax:11.39€
Brand: TBS
Model: NINJA-UFL-SMA-TBS
Equipped with a fine and flexible wire, this antenna cable is easier to integrate into configurations lacking space.
Specifications
W..
5.90€
Ex Tax:4.84€