%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
M10Q-5883-PP/62798-large_default-gnss-compass-m10q-5883-by-matek-solderless-250x250.jpg "GNSS & Compass M10Q-5883 By Matek - Solderless")
M10Q-5883-PP/62770-large_default-gnss-compass-m10q-5883-by-matek-solderless-250x250.jpg "GNSS & Compass M10Q-5883 By Matek - Solderless")
Model: (SANS SOUDURES)M10Q-5883-PP
No more soldering!
Find the M10Q-5883 GPS already equipped with cables and connector.
No soldering on your part is now required, we"ve done it for you.
Once your adjustments and settings are made, all you have to do is plug in!
Note: This item is only compatible with the Argus solderless stack (rel..
44.18€
Ex Tax:44.18€
Model: VALKYRIE-M10MATEK-TPUBYDFR
GPS mount for installing a Matek M10Q on the Valkyrie 5.1" from ParallaxFPV.
Specifications
Material : TPU
Compatibility : Parallax Vlakyrie 5.1"
Weight : ~3.5g
Included
1x GPS mount
Voir plus..
4.84€
Ex Tax:4.84€
Model: PUNCH-SHORTY-BACKPACK-ANTENNA-M10Q
This TPU mount allows you to install two Walksnail type antennas (tube diameter 4mm) as well as a Matek M10Q GPS on the back of the Piratframes Punch and Shorty frames.
Specifications
Material : TPU
Easy to install
Weight : ~5.8g
Included
1x TPU mount
Voir plus..
5.66€
Ex Tax:5.66€
Model: PUNCH-SHORTY-BACKPACK-1ANTENNA-M10Q
This TPU mount allows you to install one O3 or Walksnail type antenna (tube diameter 4mm) as well as a Matek M10Q GPS on the back of the Piratframes Punch and Shorty frames.
Specifications
Material : TPU
Easy to install
Weight : ~5.2g
Included
1x TPU mount
Voir plus..
5.66€
Ex Tax:5.66€
Model: H7A3-SLIM
The Matek H7A3-SLIM flight controller is equipped with a SPL06-001 barometer, an AT7456E OSD, 6 UARTs and has a USB type C output.
Specifications
MCU: STM32H7A3RIT6, 280MHz Cortex-M7, 1.4MB RAM, 2MB Flash
IMU: ICM42688P
Baro: SPL06-001
OSD: AT7456E
Blackbox: 128MB Flash (1G-bit NAND)
6x Uarts ..
63.85€
Ex Tax:63.85€
Model: PM20S-2
The PM20S module has a wide operating input range of 9 to 85V with TVS protection.
With a weight of 63g, it is made with 100V DC components.
Specifications
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Vol..
56.48€
Ex Tax:56.48€
Model: CAN-G474
Matek"s CAN-G474 is a Node adapter based on ArduPilot AP-Periph firmware.
With this board, you will be able to more easily use ArduPilot to convert GNSS, Compass, barometers, airspeed sensor, PWM and buzzer devices to DroneCAN devices.
CAN-G474 has STM32G474 chip and 5Mbit/s transceiver.
Spec..
20.41€
Ex Tax:20.41€
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
15.49€
Ex Tax:15.49€
Model: M9N-5883
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrent..
47.46€
Ex Tax:47.46€
Model: ELRS-R24-TD
The Matek ExpressLRS R24-P6V True Diversity receiver has a telemetry power of 20dBm (100mW) and transmits on a 2.4GHz RF frequency.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
ESP32-PICO-D4, ..
25.33€
Ex Tax:25.33€
Model: ELRS-R24-P6V
This ExpressLRS receiver from Matek is equipped with a vario to indicate the ascensional speed.
The R24-P6V is a receiver primarily intended for aircraft/flying wings.
It consists of a telemetry power of 22.5dBm (180mW), an SPL06-001 barometer and transmits on a 2.4GHz RF frequency.
*Power and dist..
25.33€
Ex Tax:25.33€
Model: MT-ASPD-DLVR
Matek Digital Airspeed Sensor ASPD-DLVR
All sensors DLVR series is the best airspeed sensor ArduPilot currently support.
Specifications & Features• ArduPilot AP_Periph L431/F405/F303 CAN node• All sensors DLVR-L10D, Industrial temperature range• CAN & I2C Interface• Typical Platforms: Fixed-Wing, Qu..
106.48€
Ex Tax:106.48€