![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: H7A3-SLIM
The Matek H7A3-SLIM flight controller is equipped with a SPL06-001 barometer, an AT7456E OSD, 6 UARTs and has a USB type C output.
Specifications
MCU: STM32H7A3RIT6, 280MHz Cortex-M7, 1.4MB RAM, 2MB Flash
IMU: ICM42688P
Baro: SPL06-001
OSD: AT7456E
Blackbox: 128MB Flash (1G-bit NAND)
6x Uarts ..
77.90€
Ex Tax:63.85€
Model: PM20S-2
The PM20S module has a wide operating input range of 9 to 85V with TVS protection.
With a weight of 63g, it is made with 100V DC components.
Specifications
PM20S-2 is made with 100V DC components.
Support 9V to 85V DC operating Input voltage with 85V TVS protection
2x independent Step-Down Vol..
68.90€
Ex Tax:56.48€
Model: CAN-G474
Matek"s CAN-G474 is a Node adapter based on ArduPilot AP-Periph firmware.
With this board, you will be able to more easily use ArduPilot to convert GNSS, Compass, barometers, airspeed sensor, PWM and buzzer devices to DroneCAN devices.
CAN-G474 has STM32G474 chip and 5Mbit/s transceiver.
Spec..
24.90€
Ex Tax:20.41€
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
18.90€
Ex Tax:15.49€
Model: *CAN-L4-RC
This L4 RC CAN adapter from Matek is based on the ArduPilot AP_Periph firmware and allows you to turn a serial receiver into a CAN receiver.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
1x UART(UART3, Tx3/ Rx3)
ST debug, SWCLK & SWDIO
Input voltage range: 4.5~5.5V @..
15.90€
Ex Tax:13.03€
Model: AXIS-C246-1850KV-MR30
"Fly to create" is the slogan representing the association of AxisFlying with the Escape FPV pilot through these new motors dedicated to cinematic flight, the C246.
Here is the 1850KV version with MR30 connectors, intended for the Argus Plug & Play stack (related accessorie), the stack requiring NO ..
26.90€
Ex Tax:22.05€
Model: M9N-5883
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrent..
57.90€
Ex Tax:47.46€
Model: MD010703
Hisingy"s powerful Matrix motor was designed for high-performance FPV drones.
It offers exceptional speed and responsiveness, guaranteeing you a very good flying experience.
This 0805 14000KV motor, designed with precision and durability in mind, will be perfect on the Stargazer mini drone.
Speci..
77.90€
Ex Tax:63.85€
Model: ITSY-FAN
This 1g SPYDR micro cooling fan was designed to fit into your ITSY and keep the DJI O3 air unit cool.
SPYDR tests have demonstrated that the O3 full size unit is capable of remaining on standby for more than 15 minutes and the O3 naked for more than 8 minutes without danger of overheating. Current c..
15.90€
Ex Tax:13.03€
Model: GP106448
Experience the powerful performance of GEPRC"s VTX PRO MATEN 5.8G 2.5W.
This analog VTX has 5 adjustable power levels and a maximum power of up to 2500mW. The transmission signal is very stable and the penetration ability is excellent.
The durable CNC aluminum alloy shell provides an original aesthe..
80.90€
Ex Tax:66.31€
Model: ELRS-R24-TD
The Matek ExpressLRS R24-P6V True Diversity receiver has a telemetry power of 20dBm (100mW) and transmits on a 2.4GHz RF frequency.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
ESP32-PICO-D4, ..
30.90€
Ex Tax:25.33€
Model: ELRS-R24-P6V
This ExpressLRS receiver from Matek is equipped with a vario to indicate the ascensional speed.
The R24-P6V is a receiver primarily intended for aircraft/flying wings.
It consists of a telemetry power of 22.5dBm (180mW), an SPL06-001 barometer and transmits on a 2.4GHz RF frequency.
*Power and dist..
30.90€
Ex Tax:25.33€